$5.00 | 12 | | C Stand (40")
- w/ Head and Arm
- Spring Load |
$5.00 | 4 | | C Stand (40")
- w/ Head and Arm
- Sliding Leg |
$5.00 | 6 | | C+ Stand (40")
- w/ Head and Arm
- Turtle Base |
$5.00 | 3 | | Baby C Stand (20")
- w/ Head and Arm
- Spring Loaded |
$5.00 | 1 | | Baby C Stand (20")
- w/ Head and Arm
- Sliding Leg |
$5.00 | 1 | | Baby C-Stand (20")
- Shorty Mini Base
- w/ Head and Arm
- Spring Loaded |
$5.00 | 11 | | Arri Kit Stands |
$5.00 | 2 | | Baby Stand
- Double Riser |
$5.00 | 2 | | Low Mighty Baby Stand
- Double Riser |
$5.00 | 2 | | Kupo Runway Roller Stand
- Double Riser |
$5.00 | 2 | | Beefy Baby Roller Stand
- Double Riser |
$5.00 | 6 | | Beefy Baby Stand
- Double Riser |
$6.00 | 4 | | Beefy Baby Stand
- Triple Riser |
$5.00 | 5 | | Beefy Low Boy Combo
- Double Riser |
$6.00 | 12 | | Junior Combo Stand
- Double Riser |
$7.00 | 8 | | Junior Combo Stand
- Triple Riser |
$8.00 | 3 | | Junior Roller Stand
- Double Riser |
$20.00 | 6 | | Hi-Walker Overhead Stand | Sky-Hi
- Triple Riser |
$20.00 | 2 | | Hi-Hi Overhead Roller Stand | Sky-Hi
- Triple Riser |
$25.00 | 2 | | Mombo Combo Stands
- Quadruple Riser |
$25.00 | 1 | | Kupo 2-Section Wind-Up / Crank Followspot Stand
- 4.8' Max Height
- 110lbs Max Load
- On Wheels |
$35.00 | 1 | | Kupo 2-Section Wind-Up / Crank Stand
- 8' Max Height
- 99lbs Max Load
- On Wheels |
$5.00 | 2 Sets | | Junior Combo Adapter Wheels |
$7.00 | 2 Sets | | Mombo Combo Adapter Wheels |
$5.00 | 6 | | Dana Dolly Low Combo Stand |
$1.00 | 27 | | #1 Grip Clips (Spring Clamps) |
$1.00 | 36 | | #2 Grip Clips (Spring Clamps) |
$1.00 | 7 | | #2 Plastic Grip Clips (Spring Clamps) |
$1.00 | 12 | | #3 Grip Clips (Spring Clamps) |
$2.00 | 19 | | Knuckles (Gobo Heads) (Extras) |
$2.00 | 1 | | Double Gag Grip Head |
$2.00 | 4 | | Double Grip Head |
$3.00 | 10 | | Lollipop | Fat Head | 4.5 Combi Head |
$5.00 | 5 | | Matthews Baby Boom Arm |
$8.00 | 1 | | Avenger D650 Combo Boom Arm
- With 10lb Counterweight |
$4.00 | 4 | | Grid Pipe Clamp with Baby Pin | Baby Ben |
$5.00 | 4 | | Grid Pipe Clamp with Junior Male Pin | Big Ben |
$5.00 | 4 | | Grid Clamps with Junior and Baby Receiver |
$2.00 | 7 | | Pipe C-Clamp |
$2.00 | 1 | | Apollo Get-a-Grip C Clamp |
$1.50 | 4 | | PRG Mini C Clamp with 3/8" Bolt |
$2.00 | 4 | | Stage C-Clamp
- with Baby Pin |
$1.00 | 6 | | Norms Baby Pin |
$5.00 | 2 | | Chain Vice Grip (with 5/8 Baby Pin) |
$4.00 | 4 | | Foam Core Holder |
$4.00 | 8 | | Quackers | Platypus | Duckbill |
$4.00 | 9 | | Super Clamps / Mafer (with 5/8 Baby Pins) |
$4.00 | 4 | | Super Clamp / Mafer Clip Clamp Combo
- Includes 1/4-20 Male Spigot |
$4.00 | 7 | | Cardellini (End Jaw)
- 3" Bite |
$4.00 | 7 | | Cardellini (Center Jaw)
- 3" Bite |
$4.00 | 1 | | Medium Jaw Cardellini (End Jaw)
- 4" Bite |
$4.00 | 3 | | Long Jaw Cardellini (End Jaw)
- 6" Biter |
$5.00 | 2 | | Kupo Supervisor Clamp (Long Jaw Cardellini)
- Dual Baby Pin |
$5.00 | 2 | | Modern Studio MP-9 Clamp |
$2.00 | 2 | | Gator Clamps with Baby Pin | Gaffer Clamps |
$5.00 | 1 | | Nerd Clamp |
$4.00 | 2 | | 4" Tree Branch Clamp |
$1.00 | 22 | | Speed Clip (Green)
- For 1-1/4" Pipe |
$1.00 | 34 | | Speed Clip (Black)
- For 1-1/4" Pipe |
$1.00 | 13 | | Baby Pipe C-Clamp |
$2.00 | 4 | | Junior Pipe C-Clamp |
$8.00 | 2 | | Speed C-Clamp
- For 1-1/4" Pipe |
$3.00 | 2 | | 6” C-Clamp
- with 5/8 Baby Pins |
$4.00 | 2 | | 8” C-Clamp
- with 5/8 Baby Pins |
$5.00 | 1 | | 10” C-Clamp
- with 5/8 Baby Pins |
$6.00 | 2 | | 12” C-Clamp
- with 5/8 Baby Pins |
$2.00 | 2 | - | 12” Furni Clamps
- with 5/8 Baby Pin |
$3.00 | 10 | | Modern Studio Swivel Scaffolding / Cheeseborough Clamp |
$3.00 | 10 | | Modern Studio Fixed Right Angle Scaffolding / Cheeseborough Clamp |
$3.00 | 9 | | Swivel Scaffolding / Cheeseborough Clamp |
$3.00 | 9 | | Fixed Right Angle Scaffolding / Cheeseborough Clamp |
$2.00 | 1 | | Grid Clamp with 3/8" Male Thread |
$2.00 | 1 | | Grid Clamp with 3/8" Female Thread |
$2.00 | 6 | | Grid Clamp with Eye Nut |
$2.00 | 4 | | I-Beam Grid Clamp |
$5.00 | 4 | | Center Mount Beam Clamp
- 1/2 Female Thread
- Includes 1/2" Eye-Bolt
- Max Beam Thickness: 9/16
- Beam Width: 2" - 7"
- Working Load Limit: 1,350lbs |
$2.00 | 8 | | Combination Camera Rod Starter
- 5/8 Swivel Clamps
- 5/8" to 5/8" |
$2.00 | 4 | | Flat Gel Frame Holder with 5/8" Pin |
$2.00 | 2 | | 5/8" Rod Clamp with Baby Pin |
$2.00 | 15 | | Drop Ceiling Clips | Scissor Clips |
$2.00 | 2 | | Drop Ceiling Cable Hooks | Scissor Clip with Cable Support |
$2.00 | 12 | | Junior to Baby Pin Adapter | Butt Plugs |
$2.00 | 2 | | Baby to Junior Receiver |
$2.00 | 2 | | Thin Putty Knife with Baby Pin |
$2.00 | 2 | | Baby Stand 12” Extension |
$2.00 | 1 | | Baby Stand 14” Extension |
$2.00 | 2 | | Baby Stand 18” Extension |
$5.00 | 1 | | Mole Richardson Trapeze |
$2.00 | 2 | | Magic Finger |
$2.00 | 2 | | Swivel Double Baby Receiver |
$6.00 | 1 | | Bogen Manfrotto Variable Friction Magic Arm with Super Clamp and Camera Bracket |
$5.00 | 1 | | Baby Triple Header |
$5.00 | 2 | | Junior Triple Header |
$5.00 | 2 | | Baby Offset Arm with Dual 5/8' Pins |
$6.00 | 2 | | Junior Offset Arm |
$3.00 | 16 | | Baby Nail on a Plate | Baby Pigeon Plate |
$3.00 | 2 | | 90º / Right Angle Nail on a Plate | Baby 90º Pigeon Plate |
$4.00 | 2 | | Junior Nail on a Plate | Junior Pigeon Plate |
$5.00 | 3 | | 2x4 Wall Spreader Set |
$5.00 | 2 | | 2x6 Wall Spreader Set |
$5.00 | 3 | | 1-1/4" Pipe Boom Kit | Menace Arm |
$3.00 | 2 | | C-Boom Clamp
- C-Stand Required |
$3.00 | 2 | | 90º Junior Pin |
$0.50 | 25 | | 16” Safety Cable |
$0.50 | 15 | | 32” Safety Cable |
$1.00 | 12 | | Spiral Tie Down Stakes
- 18" |
$0.50 | 2 | | Delvcam Swivel Mount Adapter with 1/4-20" Shoe Adapter |
$0.50 | 2 | | Lowel Tota-Tilter |
$0.50 | 3 | | Lowel Wood Screw Baby Stud
- 5/8" Baby Pin |
$0.50 | 2 | | Lowel ViP-38 Stud Link - 5/8" Baby Pin with 1/4-20 male screw |
$0.50 | 2 | | 1/4-20" Male to 5/8" Baby Pin |
$0.50 | 2 | | 3/8-16" Male to 5/8" Baby Pin |
$0.50 | 2 | | 1/4-20" Female to 5/8" Baby Pin |
$0.50 | 2 | | 3/8-16" Female to 5/8" Baby Pin |
$0.50 | 4 | | Double Male 5/8" Baby Pin |
$0.50 | 2 | | 5/8" Baby Stud with 1/4"-20 Screw Mount |
$0.50 | 4 | | Starter Pin 1/4" to 1/4" |
$0.50 | 2 | | Standard Stud
(1/4- 20") |
$0.50 | 2 | | Standard Stud (3/8”) |
$0.50 | 1 | | 1/4-in-20 Threaded Mounting Plate with Baby 5/8'' (16mm) Stud |
$0.50 | 1 | | 3/8 Threaded Mounting Plate with Baby 5/8'' (16mm) Stud |
$2.00 | 10 | | Side Swing Pulley
- 34KN
- 9/16 Rope
-Working Load Limit: 1,124lbs |
$1.00 | 6 | | 5/16" Galvanized Eye to Eye Swivel
- Working Load Limit: 1,260lbs |
$5.00 | 1 | | Matthews Grip Helper |
$1.00 | 1 | | MSE 8” MICROgrip 8” Rod
- with 1/4-20 Male and 1/4-20 Female |
$1.00 | 8 | | Matthews 20" Mini Grip Arm |
$2.00 | 9 | | Matthews Mini Grip Head |
$2.00 | 2 | | Matthews MiniGrip Double Gag Head |
$2.00 | 4 | | Matthews Mini Matthellini / Cardellini |
$2.00 | 2 | | Skinny Mini Cardellini |
$0.50 | 4 | | 5/8" Baby Receiver with 1/4-20" Thread |
$5.00 | 2 | | Adjustable Headrest Mount
- Suitable for 5.5"-7.5" (14-19cm) Seat Headrest
- 1/4-20" Screw Holes
- 3/8-16" Screw Holes |
$1.00 | 4 | | 11" Articulating Magic Arm (Israeli) |
$2.00 | 2 | | Magic Ball
- 3/8-16" Threads
- 1 × Magic Ball
- 6 × Connecting Sticks
- 6 × Adapter Screws
- 1 x Wrench |
$0.50 | 2 | | Magic Cube
- 1/4-20" Screw Holes
- 3/8-16" Screw Holes
- Optional GoPro Attachments |
$0.50 | 5 | | Hot Shoe Adapter
- 1/4-20" Male Thread |
$0.50 | 2 | | Cold Shoe Adapter
- 1/4-20" Male Thread |
$0.25 | 2 | | 1/4-20" Barrel Adapter
- Female to Female |
$0.25 | 4 | | 3/8-16" Barrel Adapter
- Female to Female |
$0.25 | 6 | | 3/8-16" to 1/4-20" Double End Stud / Spigot (Aluminum) |
$1.50 | 6 | | Mini Crab Clamp |
$0.50 | 4 | | Ball Head Friction Mount with 1/4-20 |
$0.50 | 2 | | 1/4-20" Male and Female Shoe Adapter |
$1.00 | 4 | | Magnetic Base Baby Pin
- 44lbs Pull Capacity
- Rubber Coated |
$1.00 | 6 | | Magnetic Base Baby Pin
- 90lbs Pull Capacity
- Rubber Coated |
$0.50 | 4 | | 100lb Pull Capacity Flat Magnets |
$0.25 | 4 | | Magnetic Hooks |
$5.00 | 1 | Filmtools 4” Extension Riser Gator Grip and Lighting | Filmtools 4” Extension Riser (CAMERA SUPORT)
- with 3/8"16 Male Threaded Spud
- with 3/8" Female Thread on Opposite Side |
$2.00 | 2 | | Wood's Power Grip 6" Suction Cup with 1/4-20 Stud (Vehicle Rigging) |
$2.00 | 1 | | Wood's Power Grip 6" Suction Cup with 3/8-16 Stud (Vehicle Rigging) |
$2.00 | 3 | | Wood's Power Grip 6" Suction Cup with 5/8" Baby Pin (Vehicle Rigging) |
$10.00 | 1 | | MSE / Woods BH-30 Ball Head (CAMERA SUPORT)
- Quick Release Plate
- 1/4-20 Flat Head Camera Screw
- 3/8-16 Quick Release Plate Screw
- with 10" (25cm) Suction Cup Mount
- 39lb Load Capacity |
$3.00 | 1 | | Wood's Power Grip 10" Suction Cup with Mounting Plate (Vehicle Rigging)
- 1/4-20 Thread
- 3/8-16 Thread |
$5.00 | 2 | | Modern Deluxe 10" Super Suction Cup with Cheese Plate and 1-1/4" Starters
Gator Grip and Lighting (Vehicle Rigging) |
$3.00 | 14 | | Full Apple |
$3.00 | 12 | | Half Apple |
$3.00 | 12 | | Quarter Apple |
$3.00 | 12 | | Pancake Apple |
$3.00 | 4 | | Mini Full Apple |
$3.00 | 4 | | Mini Half Apple |
$3.00 | 4 | | Mini Quarter Apple |
$3.00 | 4 | | Mini Pancake Apple |
$3.00 | 2 | | 5lb Boa Shot Bag (SANDBAG) |
$3.00 | 6 | | 5lb Shot Bag (SANDBAG) |
$4.00 | 9 | | 10lb Shot Bag (SANDBAG) |
$5.00 | 12 | | 25lb Shot Bag (SANDBAG) |
$4.00 | 2 | | 10lb Boa Shot Bag (SANDBAG) |
$5.00 | 2 | | 15lb Boa Shot Bag (SANDBAG) |
$2.00 | 4 | | 5lb Sandbag (SANDBAG) |
$3.00 | 10 | | 10lb Sandbag |
$4.00 | 40 | | 20lb Sandbag |
$4.00 | 11 | | 25lb Sandbag |
$5.00 | 18 | | 35lb Sandbag |
$3.00 | 1 | | Grip Head for PhotoFlex LiteDisc 42" (Flex Fill)
- 3" - 5' Capability |
$5.00 | 1 | | Avenger D700B Extension Holder for Oval Reflector (Flex Fill)
- 26" - 6' Capability |
$1.50 | 1 | | 12" Impact Gold / Silver Reflector (Flex Fill) |
$.002 | 1 | | 12” Trumagine 5-in-1 Reflector Kit (Flex Fill)
-Silver
- White
- Gold
- Black
- Diffusion |
$2.00 | 1 | | 14" Westcott Reflector (Flex Fill)
- Gold
- Silver |
$3.00 | 1 | | 22” Lastolite Grey/White Card (Flex Fill)
|
$4.00 | 1 | | 24” Etekcity 5-in-1 Reflector Kit (Flex Fill)
-Silver
- White
- Gold
- Black
- Diffusion |
$5.00 | 1 | | 42” PhotoFlex LiteDisk Reflector (Flex Fill)
- Silver
- White |
$6.00 | 1 | | 42” Fotodiox 5-in-1 Reflector Kit (Flex Fill)
-Silver
- White
- Gold
- Black
- Diffusion |
$6.00 | 1 | | 42” Newer 5-in-1 Reflector Kit (Flex Fill)
-Silver
- White
- Gold
- Black
- Diffusion |
$7.00 | 1 | | 48" Lastolite Reflector
(Flex Fill)
- Silver
- White |
$10.00 | 1 | | 4'x6' Fotodiox 5-in-1 Reflector Kit (Flex Fill)
- Silver
- White
- Gold
- Black
- Diffusion |
$1.00 | 11 | | 1/2" Shackle
- Working Load Limit: 4,000 lbs |
$2.00 | 4 | | 3/4" Shackle
- Working Load Limit: 9,500 lbs |
$1.00 | 12 | | Tie Down Slings
- 18"
- Green
- Working Load Limit: 500lbs |
$2.00 | 8 | | Tie Down Slings
- 13"
- Black
- Working Load Limit: 1,500lbs |
$2.00 | 8 | | Tie Down Slings
- 18"
- Black
- Working Load Limit: 1,200lbs |
$2.00 | 2 | | Axel Straps
- Working Load Limit: 3,333 lbs |
$2.00 | 2 | | 4' Lifting Slings
- Vertical Capacity: 3,200lbs
- Choker Capacity: 2,500lbs
Basket Capacity: 6,400lbs
|
$5.00 | 2 | | 3' Spanset
- Vertical load: 5,300lbs
- Basket load: 10,600lbs |
$5.00 | 2 | | 4' Spanset
- Vertical load: 5,300lbs
- Basket load: 10,600lbs |
$2.00 | 10 | | 4.5" Locking Carabiner
- 45kn |
$1.00 | 4 | | 4" Locking Carabiner
- Working Load Limit: 260lbs
|
$1.00 | 1 | | 5'-8" Speed Rail T6 Aluminum (3/4") |
$2.00 | 20 | | 6' Speed Rail T6 Aluminum (3/4") |
$1.00 | 1 | | 1' Speed Rail T6 Aluminum (1") |
$1.50 | 5 | | 2' Speed Rail T6 Aluminum (1") |
$3.00 | 4 | | 6' Speed Rail T6 Aluminum (1") |
$1.00 | 6 | | 1' Speed Rail T6 Aluminum (1 ¼) |
$2.00 | 4 | | 2' Speed Rail T6 Aluminum (1 ¼) |
$3.00 | 8 | | 3' Speed Rail T6 Aluminum (1 ¼) |
$3.50 | 4 | | 4' Speed Rail T6 Aluminum (1 ¼) |
$4.00 | 16 | | 6' Speed Rail T6 Aluminum (1 ¼) |
$4.50 | 2 | | 7' Speed Rail T6 Aluminum (1 ¼) |
$5.00 | 4 | | 8' Speed Rail T6 Aluminum (1 ¼) |
$6.00 | 14 | | 10' Speed Rail T6 Aluminum (1 ¼) |
$7.00 | 8 | | 12' Speed Rail T6 Aluminum (1 ¼) |
$3.00 | 3 | | 2' Speed Rail T6 Aluminum (1 ½) |
$4.00 | 2 | | 3' Speed Rail T6 Aluminum (1 ½) |
$4.50 | 6 | | 4' Speed Rail T6 Aluminum (1 ½) |
$5.00 | 2 | | 6' Speed Rail T6 Aluminum (1 ½) |
$6.00 | 4 | | 8' Speed Rail T6 Aluminum (1 ½) |
$7.00 | 13 | | 10' Speed Rail T6 Aluminum (1 ½) |
$10.00 | 4 | | 20' Speed Rail T6 Aluminum (1 ½)
|
$0.50 | 6 | | Speed Rail Ears (1") |
$0.50 | 8 | | Speed Rail 3-6 Elbow (1") |
$0.50 | 6 | | Speed Rail 3-7 Elbow
(1 ¼) |
$0.50 | 3 | | Speed Rail 30B-7 Swivel "T" Cross (1 ¼) |
$0.50 | 1 | | Speed Rail 5E-7 90º "T"
(1 ¼) |
$0.50 | 3 | | Speed Rail 5-7 90º "T"
(1 ¼) |
$0.50 | 1 | | Speed Rail 50-7 Base Flange Tab (1 ¼) |
$0.50 | 1 | | Speed Rail 17M-7 Shelf Tab
(1 ¼) |
$0.50 | 3 | | Speed Rail 52E-7 Wall Flange (1 ¼) |
$0.50 | 1 | | Speed Rail 10-7 Offset Cross
(1 ¼) |
$0.50 | 3 | | Speed Rail 14S-7 Split Cross "T" (1 ¼) |
$0.50 | 2 | | Speed Rail 45º Fitting
(1 ¼) |
$0.50 | 2 | | Speed Rail 42-7 Round Flange Plates (1 ¼) |
$0.50 | 2 | | Speed Rail 6-7 90º Bolt On "T" (1 ¼) |
$0.50 | 1 | | Speed Rail 17-8 Adjustable "T" Flange
(1 ¼) |
$0.50 | 1 | | Speed Rail 012-2242-BZ Pipe Flange Base (1 ¼) |
$2.00 | 8 | | Frame Corners for Speed Rail (1 ¼) |
$2.00 | 4 | | Frame Ears for Speed Rail (1 ¼) |
$2.00 | 4 | | 10” Speed Rail Pipe Coupler (1 ¼) |
$2.00 | 2 | | 18” Speed Rail Pipe Coupler (1 ¼) |
$0.75 | 2 | | Pipe "T" Receiver Bracket
- 1-1/4” Pipe |
$2.00 | 8 | | Frame Corners for Speed Rail (1 ½) |
$2.00 | 4 | | Frame Ears for Speed Rail (1 ½) |
$2.00 | 8 | | Advantage Grip EZ Travel 4x4 Break-Down Collapsible Frame
- Hard Travel Case |
$7.00 | 8 | | 4x4 Overhead Frame
- 3/4" Round |
$10.00 | 2 | | 6x6 Overhead Frame
- 1" Square |
$15.00 | 2 | | 8x8 Overhead Frame
- 1" Square |
$15.00 | 1 | | 4x4 40º Fabric LCD / Grid |
$30.00 | 1 | | 6x6 40º Fabric LCD / Grid |
$35.00 | 1 | | 8x8 30º Fabric LCD / Grid |
$50.00 | 1 | | 12x12 30º Fabric LCD / Grid |
$7.00 | 2 | | 4x4 Single Net (RAGS) |
$7.00 | 2 | | 4x4 Double Net (RAGS) |
$7.00 | 2 | | 4x4 Solid (RAGS) |
$7.00 | 4 | | 4x4 Solid Floppy (RAGS) |
$7.00 | 2
| | 4x4 B&W Griff |
$7.00 | 2 | | 4x4 1/4 Poly Silk (RAGS) |
$7.00 | 3 | | 4x4 Full Poly Silk (RAGS) |
$7.00 | 2 | | 4x4 Halo Silk (RAGS) |
$7.00 | 2 | | 4x4 Light Halo Silk (RAGS) |
$7.00 | 2 | | 4x4 1/4 Silent Grid (RAGS) |
$7.00 | 2 | | 4x4 1/2 Silent Lite Grid (RAGS) |
$7.00 | 2 | | 4x4 Full Silent Grid (RAGS) |
$10.00 | 2 | | 4x4 Hi-Lite (RAGS) |
$7.00 | 3 | | 4x4 Bleached Muslin (RAGS) |
$7.00 | 3 | | 4x4 Unbleached Muslin (RAGS) |
$7.00 | 2 | | 4x4 UltraBounce | Soft Bounce | Clay Coat (RAGS) |
$7.00 | 2 | | 4x4 Silver Lamé | Priscilla (RAGS) |
$7.00 | 2 | | 4x4 Gold Lamé | Elvis (RAGS) |
$7.00 | 2 | | 4x4 Checkerboard | Lima | Lisa Marie (RAGS) |
$20.00 | 5 | | 6x6 Overhead Single Net (RAGS) |
$25.00 | 5 | | 6x6 Overhead Double Net (RAGS) |
$15.00 | 9 | | 6x6 Overhead Solid (RAGS) |
$15.00 | 2 | | 6x6 Overhead 1/4 Stop Poly Silk (RAGS) |
$15.00 | 6 | | 6x6 Overhead Full Poly Silk (RAGS) |
$15.00 | 2 | | 6x6 Overhead 1/4 Silent Grid Cloth (RAGS) |
$15.00 | 2 | | 6x6 Overhead 1/2 Silent Lite Grid Cloth (RAGS) |
$15.00 | 2 | | 6x6 Overhead Full Silent Lite Grid Cloth (RAGS) |
$15.00 | 1 | | 6x6 Overhead Full Grid Cloth (NOISY) (RAGS) |
$25.00 | 1 | | 6x6 Overhead 1/2 Soft Frost (RAGS) |
$30.00 | 4 | | 6x6 Overhead Hi-Lite (RAGS) |
$15.00 | 3 | | 6x6 Overhead Seamless Unbleached Muslin (RAGS) |
$15.00 | 4 | | 6x6 Overhead Seamless Bleached Muslin (RAGS) |
$15.00 | 1 | | 6x6 Magic Cloth Diffusion (Rags) |
$15.00 | 2 | | 6x6 Overhead UltraBounce |
Soft Bounce | Clay Coat (RAGS) |
$15.00 | 5 | | 6x6 Overhead B&W Griff (RAGS) |
$15.00 | 1 | | 6x6 Overhead Silver Lamé | Priscilla (RAGS) |
$30.00 | 1 | | 6x6 Digi Green (RAGS) |
$30.00 | 1 | | 6x6 Chroma Green (RAGS) |
$22.00 | 4 | | 8x8 Overhead Single Net (RAGS) |
$27.00 | 3 | | 8x8 Overhead Double Net (RAGS) |
$17.00 | 5 | | 8x8 Overhead Solid (RAGS) |
$17.00 | 2 | | 8x8 Overhead 1/4 Stop Poly Silk (RAGS) |
$17.00 | 4 | | 8x8 Overhead Full Poly Silk (RAGS) |
$17.00 | 2 | | 8x8 Overhead 1/4 Silent Grid Cloth (RAGS) |
$17.00 | 2 | | 8x8 Overhead 1/2 Silent Lite Grid Cloth (RAGS) |
$17.0 | 2 | | 8x8 Overhead Full Silent Lite Grid Cloth (RAGS) |
$17.00 | 1 | | 8x8 Overhead 1/4 Grid Cloth (NOISY) (RAGS) |
$17.00 | 1 | | 8x8 Overhead Full Grid Cloth (NOISY) (RAGS) |
$35.00 | 2 | | 8x8 Overhead Hi-Lite (RAGS) |
$30.00 | 1 | | 8x8 Overhead 1/2 Soft Frost (RAGS) |
$17.00 | 2 | | 8x8 Overhead Bleached Muslin (RAGS) |
$17.00 | 3 | | 8x8 Overhead Unbleached Muslin (RAGS) |
$17.00 | 1 | | 8x8 Magic Cloth Diffusion (RAGS) |
$17.00 | 2 | | 8x8 Overhead UltraBounce |
Soft Bounce | Clay Coat (RAGS) |
$17.00 | 4 | | 8x8 Overhead B&W Griff (RAGS) |
$30.00 | 1 | | 8x8 Overhead Gold Lamé | Elvis (RAGS) |
$20.00 | 1 | | 8x8 Overhead Chroma Blue Screen (RAGS) |
$20.00 | 1 | | 8x8 Overhead Chroma Green Screen (RAGS) |
$20.00 | 1 | | 8x8 Overhead Digi Green Screen (RAGS) |
$40.00 | 2 | | 12x12 Overhead Single Net (RAGS) |
$50.00 | 2 | | 12x12 Overhead Double Net (RAGS) |
$25.00 | 7 | | 12x12 Overhead Solid (RAGS) |
$25.00 | 2 | | 12x12 Overhead 1/4 Stop Poly Silk (RAGS) |
$25.00 | 4 | | 12x12 Overhead Full Poly Silk (RAGS) |
$25.00 | 1 | | 12x12 Halo Silk (RAGS) |
$25.00 | 1 | | 12x12 Overhead 1/4 Grid Cloth (NOISY) (RAGS) |
$25.00 | 2 | | 12x12 Overhead 1/4 Silent Grid Cloth (RAGS) |
$25.00 | 2 | | 12x12 Overhead 1/2 Silent Lite Grid Cloth (RAGS) |
$25.00 | 2 | | 12x12 Overhead Full Silent Lite Grid Cloth (RAGS) |
$50.00 | 1 | | 12x12 1/2 Soft Frost (RAGS) |
$50.00 | 2 | | 12x12 Overhead Hi-Lite (RAGS) |
$25.00 | 1 | | 12x12 Overhead Bleached Muslin (RAGS) |
$25.00 | 2 | | 12x12 Overhead Unbleached Muslin (RAGS) |
$25.00 | 2 | | 12x12 Overhead UltraBounce | Soft Bounce | Clay Coat (RAGS) |
$25.00 | 4 | | 12x12 Overhead B&W Griff (RAGS) |
$35.00 | 1 | | 12x12 Overhead Silver Lamé | Priscilla (RAGS) |
$35.00 | 1 | | 12x12 Overhead Gold Lamé | Elvis (RAGS) |
$35.00 | 1 | | 12x12 Reversible Overhead Gold & White Checkerboard Lamé (RAGS) |
$35.00 | 1 | | 12x12 Reversible Overhead Gold & Silver / Black & White Checkerboard Lamé (RAGS) |
$45.00 | 1 | | 12x12 Overhead Digi-Green (RAGS) |
$45.00 | 1 | | 12x12 Overhead Chroma Green (RAGS) |
$35.00 | 1 | | 12x20 Overhead Solid (RAGS) |
$40.00 | 1 | | 12x20 Overhead UltraBounce |
Soft Bounce | Clay Coat (RAGS) |
$75.00 | 1 | | 20x20 Overhead White Single Net (RAGS) |
$25.00 | 1 | | 20x20 Overhead Solid (RAGS) |
$25.00 | 2 | | 20x20 Overhead Full Poly Silk (RAGS) |
$45.00 | 1 | | 20x20 Overhead Full Silent Grid Cloth (RAGS) |
$35.00 | 1 | | 20x20 Overhead Full Grid Cloth (RAGS) |
$35.00 | 1 | | 20x20 Overhead Bleached Muslin (RAGS) |
$35.00 | 1 | | 20x20 Overhead UltraBounce | Soft Bounce | Clay Coat (RAGS) |
$75.00 | 1 | | 20x20 Reversible Blue/Green MATT Screen (RAGS) |
$5.00 | 1 | | 12x18 Single Net |
$5.00 | 1 | | 12x18 Double Net |
$5.00 | 2 | | 12x18 Solid |
$5.00 | 1 | | 12x18 Silk |
$30.00 | 1 | | 18x24 Flag Kit
- 2 x Solids
- 1 x Single
- 1 x Double
- 1 x Silk
- 1 x Flag Bag |
$6.00 | 6 | | 18x24 Single Net |
$6.00 | 6 | | 18x24 Double Net |
$6.00 | 7 | | 18x24 Solid Flag |
$7.00 | 2 | | 18x24 Solid Floppy |
$6.00 | 6 | | 18x24 Silk |
$4.00 | 2 | | 18x24 Open Frame |
$4.00 | 2 | | 18x24 Wood Cucoloris |
$4.00 | 2 | | 18x24 Cello Cucoloris |
$3.00 | 16 | | 2x2 Open Frame |
$35.00 | 1 | | 2x3 Flag Kit
- 2 x Solids
- 1 x Single
- 1 x Double
- 1 x Silk
- 1 x Flag Bag |
$7.00 | 4 | | 2x3 Single Net |
$7.00 | 4 | | 2x3 Double Net |
$7.00 | 11 | | 2x3 Solid Flag |
$8.00 | 1 | | 2x3 Solid Floppy |
$7.00 | 4 | | 2x3 Silk |
$5.00 | 8 | | 2x3 Open Frame |
$5.00 | 2 | | 2x3 Wood Cucoloris |
$5.00 | 3 | | 2x3 Cello Cucoloris |
$7.00 | 3 | | 4x4 Single Net |
$10.00 | 3 | | 4x4 Double Net |
$10.00 | 2 | | 4x4 Solid Flag |
$12.00 | 3 | | 4x4 Solid Floppy (Bottom Hinge) |
$12.00 | 8 | | 4x4 Solid Floppy (Top Hinge) |
$13.00 | 4 | | 4x4 Solid Water Floppy (Top Hinge) |
$7.00 | 1 | | 4x4 1/4 Stop Silk |
$7.00 | 3 | | 4x4 Silk |
$12.00 | 1 | | 4x4 Bleached Muslin Floppy |
$12.00 | 1 | | 4x4 Unbleached Muslin Floppy |
$12.00 | 2 | | 4x4 Ultrabounce Floppy |
$6.00 | 4 | | 4x4 Open Frame |
$8.00 | 1 | | 4x4 Wood Cucoloris |
$8.00 | 2 | | 4x4 Cello Cucoloris |
$5.00 | 2 | | 10x42 Cutter | Solid Flag |
$7.00 | 8 | | 3x3 Open Frame |
$5.00 | 1 | | 30x30 Solid Floppy |
$6.00 | 2 | | 18x48 Cutter | Solid Flag |
$15.00 | 2 | | 2x6 Cutter | Solid Flag |
$15.00 | 1 | | 42x42 Silver Aluminum Reflector (Needs Baby Stand) |
$20.00 | 2 | | 42x42 Silver Aluminum Reflector with Yoke Brake (Needs Junior Stand) |
$2.50 | 4 | | 1x1 Mirror Reflector Attached to a Foam Core Holder |
$30.00 | 2 | | 42x42 Mirror Reflector with Yoke Brake |
$2.00 | 5 | | Twist-to-U "W" Adapter
- Works with Honda Generators |
$5.00 | 2 | | Honda Generator DC Charging Cord
- 10 Ft. Cord
- For Models EU1000i, EU2000i, EU3000is and EB3000CKAG Only |
$5.00 | 2 | | Honda Generator Parallel Kit
- 5 Ft. Cord
- For EU1000i and EU2000i Only |
$55.00
(plus fuel) | 2 | | Honda EU2000i 2000w Inverter Companion Generator (Put-Put)
- 1600w Rated (13.3A)
- 26.6 Twist-Lock Outlet During Parallel Capability
- Includes 2 Gal. Gas Can |
$55.00
(plus fuel) | 2 | | Honda EU2000i 2000w Inverter Generator (Put-Put)
- 1600w Rated (13.3A)
- 12v / 8.3A Unregulated DC Output
- Includes 2 Gal. Gas Can |
$85.00
(plus fuel) | 2 | | Honda EU3000is 3000w Inverter Generator
- 2500W rated (23.3A)
- 12v / 8.3A Unregulated DC Output
- Includes 5 Gal. Gas Can |
$125.00
(plus fuel) | 1 | | Honda EU7000is 7000w Inverter Generator
- 5500 Rated Watts, Electric
- 58.3/29.1 A) 120/240V of Honda Inverter Power
- Includes 5 Gal. Gas Can |
$2.00 | 18 | | 300w Lamp Dimmers (Hand Squeezers) |
$5.00 | 2 | | 650w Dimmer (Hand Squeezers) |
$5.00 | 19 | | 1K Dimmer (Hand Squeezers) |
$8.00 | 1 | | Dual Portable Dimmer
- 650w and 1500w |
$15.00 | 1 | | Arri 1800w Dimmer |
$20.00 | 1 | | 2k Variac | Powerstat Dimmer |
$1.00 | 12 | | Grounded Outlet Adapter with On Off Switch |
$2.00 | 4 | | 15amp Portable GFCI Safety Outlet |
$2.00 | 6 | | 20amp Portable GFCI Safety Outlet |
$1.00 | 2 | | 2000w Toggle Switch |
$3.00 | 2 | | Slim Power Inverter (80watt Continuous / 200watt Peak) |
$5.00 | 2 | | 400w Power Inverter |
$5.00 | 1 | | AC to DC 12V Power Adapter Converter
- With Car Cigarette Lighter Socket
- 15A / 180W |
$3.00 | 6 | | Cable Crossover
- Single Channel
- 31" L x 5.5" W |
$2.00 | 2 | | 2' (12/3) Three-Fer Stingers (Extension Cord) |
$0.75 | 2 | | 8' (16/3) Stingers (Extension Cord)(Indoor Household Cord) |
$1.00 | 1 | | 10' (16/3) Stingers (Extension Cord)(Indoor Household Cord) |
$1.50 | 2 | | 10' (14/3) Stingers (Extension Cord) |
$1.50 | 1 | | 20' (16/3) Stingers (Extension Cord) (White Indoor Household Cord) |
$2.00 | 1 | | 20' (14/3) Stingers (Extension Cord) |
$2.00 | 1 | | 25' (14/3) Stingers (Extension Cord) |
$3.00 | 1 | | 20' (12/3) Stingers (Extension Cord) |
$4.00 | 26 | | 25' (12/3) Stingers (Extension Cord) |
$4.00 | 3 | | 50' (14/3) Stingers (Extension Cord) |
$5.00 | 26 | | 50' (12/3) Stingers (Extension Cord) |
$5.50 | 1 | | 50' (12/3) Three-Fer Stingers (Extension Cord) |
$7.00 | 2 | | 50' (12/3) Multi-Outlet Stingers (Extension Cord)
- Five Outlets Spaced at 10 ft. Intervals |
$8.00 | 2 | | 100' (12/3) Stingers (Extension Cord) |
$8.50 | 1 | | 100' (12/3) Three-Fer Stingers (Extension Cord) |
$10.00 | 2 | | 100' (10/3) Stingers (Extension Cord) |
$2.00 | 1 | | 15 Amp Male Twist-Lock to Female Edison Adapter |
$2.00 | 1 | | 20 Amp Male Straight Blade to Female Edison Adapter |
$2.00 | 4 | | 20 Amp Male Stage Pin to Female Edison |
$2.00 | 1 | | 20 Amp Female Stage Pin to Male Edison |
$2.00 | 1 | | 30 Amp Male 4-Pin to Female 3-Prong Adapter |
$5.00 | 1 | | 30 Amp Twist-Lock Quad Box |
$2.00 | 1 | | 30 Amp Dryer Cord to 60 Amp Female Bates
- 125/250v |
$2.00 | 1 | | NEMA L6-30P 30 Amp Plug to 60 Amp Female Bates
- 250v |
$2.00 | 1 | | 30/50 Amp 80-SP NEMA 10-30/10-50P Universal Angle Plug "Crowfoot" to 60 Amp Female Bates
- 125/250v |
$10.00 | 1 | | 60 Amp Edison Snack Box |
$2.00 | 2 | | 60 Amp Bates Male to (3) 15a Edison Splitter |
$5.00 | 1 | | 3' Twist-Lock to Edison
- 20 Amp |
$0.25 | 1 | | 20 Amp T-Blade Edison Adapter |
$1.00 | 11 | | Cube Tap |
$1.00 | 9 | | Ground Lift Adapter | Cheater |
$1.00 | 3 | | Ground Lift Adapter Triple Tap | Cheater Triple Tap |
$2.00 | 6 | | Power Strip |
$0.25 | 5 | | Edison Socket Cord |
$0.25 | 2 | | Edison Plug to Medium Socket Adapter |
$0.25 | 4 | | Edison Keyless Current Tap |
$0.25 | 4 | | Edison Base “Y” Adapter |
$0.25 | 4 | | Medium Base Male-Female Polarized Edison Adapter | Pig Nose |
$0.50 | 4 | | Swivelier 1-Lite Screw-In Extender
- 5" Stem
- 150w Max |
$35.00 | 3 | | Muscle Cart |
$35.00 | 3 | | C-Stand Cart |
$35.00 | 1 | | Upright Grip Cart |
$35.00 | 2 | | Junior Taco Grip Cart
- Includes Flag Basket |
$40.00 | 1 | | Senior Head Cart |
$100.00 | 1 | | Super Duz-All Cart |
$75.00 | 1 | | 4x4 Flag Cart |
$65.00 | 1 | | Distro Cart |
$25.00 | 1 | | Rock-N-Roller Multi-Cart R6
- Extends from 28" to 42.5" in length
- Includes Top Shelf
- 500lb Load Capacity Max
- 150lb Load Capacity on Top Shelf |
$35.00 | 1 | | Rock-N-Roller Multi-Cart R10
Extends from 34" to 52" in length
- Includes Top Shelf
- 500lb Load Capacity Max
- 150lb Load Capacity on Top Shelf |
$60.00 | 3 | | Magliner Senior with Top and Bottom Shelf |
$50.00 | 3 | | Magliner Junior with Top and Bottom Shelf |
$40.00 | 1 | | Magliner Junior with Bottom Shelf |
$10.00 | 1 | | Triple-Tier Flag Box Cart (2x3 Capable) |
$7.00 | 1 | | Single-Tier Flag Box Cart (2x3 Capable) |
$5.00 | 1 | | Flag Box (2x3 Capable) |
$5.00 | 1 | | Flag Box (18x24 Capable) |
$10.00 | 1 | | Folding Platform Cart (400lb Capacity) |
$2.50 | 5 | | 5" Snoot Set (LIGHTS)
- 5 Piece Set
- Works With:
- Arri 300w
- Mole Richardson #3131
- Arrilite 600w
- Mole Richardson #4821 |
$2.00 | 3 | | 6-5/8" Snoot Set (LIGHTS)
- 3 Piece Set
- Works With:
- JokerBug 400
- Arri 650w
- Mole Richardson #3081 |
$2.50 | 3 | | 7-3/16" Snoot Set (LIGHTS)
- 5 Piece Set
- Works With:
- Mole Richardson #4081
- Arrilite 1k |
$1.00 | 1 | | 7-3/16" Snoot (Top Hat)
- Single Piece Set
- Works With:
- Mole Richardson #4081
- Arrilite 1k |
$2.25 | 3 | | 9" Snoot Set (LIGHTS)
- 4 Piece Set
- Works With:
- 8" Mole Richardson #5291 |
$2.50 | 2 | | 9" Snoot Set (LIGHTS)
- 5 Piece Set
- Works With:
- 8" Mole Richardson #5291 |
$2.00 | 1 | | 9" Snoot Set (LIGHTS)
- 3 Piece Set
- Works With:
- 8" Mole Richardson #5291 |
$30.00 | 2 | | Desisti 2k Junior (LIGHTS)
- Fresnel
- Barn Doors
- Full Scrim Set |
$30.00 | 2 | | Mole Richardson Junior 2k #4341 (LIGHTS)
- 10" Fresnel
- Barn Doors
- Full Scrim Set |
$30.00 | 2 | | Mole Richardson Junior 2k #5291 (LIGHTS)
- 8" Fresnel
- Barn Doors
- Full Scrim Set |
$30.00 | 2 | | Mole Richardson Mighty 2k #4091 (LIGHTS)
- Open Face
- Barn Doors
- AKS Holder
- Full Scrim Set |
$25.00 | 2 | | Mole Richardson Mickey 1k #4081 (LIGHTS)
- Open Face
- Barn Doors
- AKS Holder
- Full Scrim Set |
$25.00 | 4 | | Mole Richardson Baby 1k #3081 (LIGHTS)
- Fresnel
- Barn Doors
- Full Scrim Set |
$20.00 | 6 | | Mole Richardson 650w Tweenie II #4821 (LIGHTS)
- Fresnel
- Barn Doors
- Full Scrim Set |
$20.00 | 2 | | Mole Richardson Teenie 650w #4051 (LIGHTS)
- Open Face
- Barn Doors
- AKS Holder
- Full Scrim Set |
$15.00 | 2 | | Mole Richardson 300w Betweenie #3131 (LIGHTS)
- Fresnel
- Barn Doors
- Full Scrim Set |
$15.00 | 2 | | Mole Richardson 100w/200w Inbetweenie #3101 (LIGHTS)
- Fresnel Lens
- Barn Doors
- Full Scrim Set |
$30.00 | 1 | | Chimera 30" Lantern Lightbank (LIGHTS)
- 1 x Lantern Lightbank (1500w Max)
- 1 x Chimera Speed Ring for Mogul Base Bulb
- 1 x 1000w Mogul Base Lamp
- 4 x Rods
- 1 x ½ Skirt
- 1 x Spare 1000w Mogul Base Lamp ($60.00 Replacement Value) |
$200.00 | 3 | | Arri SkyPanel S60-C (LIGHTS)
- LED 2800K - 10,000K
- 1 x Standard Diffusion
- 1 x Yoke with Junior Pin
- 1 x Rail Mount Adapter Plate
- 1 x S60 / S120 PSU
- 1 x PowerCon TRUE1 Supply Cord
- 1 x 3-Pin XLR DC Head Cable
- 1 x 60º Honeycomb Grid
- 1 x #10 Allen Wrench
- 1 x 4x100mm T-Handle Allen Wrench
- 1 x Arri Flight Case |
$15.00 | 1 | | Arri SkyPanel Remote Control (LIGHTS)
- 1 x Contoller
- 1 x 6ft USB Cord
- 1 x Laynard
- 1 x Carrying Case |
$25.00 | 3 | | Arri SkyPanel S60-C Shallow Chimera Lightbox / Softbox with Frame
(LIGHTS)
- 36" x 48"
- 1 x 40º Soft LCD
- 1 x Soft Box
- 1 x Frame
- 1 x Interior Baffle
- 1 x Full Diffusion
- 1 x 1/2 Grid Diffusion
- 1 x 1/4 Grid Diffusion
- 1 x Chimera Bag |
$300.00 | 1 | | Arri SkyPanel S120-C (LIGHTS)
- LED 2800K - 10,000K
- 1 x Standard Diffusion
- 1 x Lite Diffusion
- 1 x Heavy Diffusion
- 1 x Yoke with Junior Pin
- 1 x Rail Mount Adapter Plate
- 1 x Ball Socket Mount
- 1 x Arri Super Clamp Adapter for PSU
- 1 x Arri S60 / S120 PSU
- 1 x PowerCon TRUE1 Supply Cord
- 1 x 3-Pin XLR DC Head Cable
- 1 x #10 Allen Wrench
- 1 x 4x100mm T-Handle Allen Wrench
- 1 x Arri Flight Case |
$30.00 | 1 | | Arri L7-C (LIGHTS)
- Fresnel Lens
- RGBW LED
- 2,700k - 10,000k
- Green Magenta Shift
- Barn Doors |
$30.00 | 1 | | Arri 2k (LIGHTS)
- Fresnel Lens
- Barn Doors |
$25.00 | 2 | | Arri ArriLite 1k (LIGHTS)
- Open Face
- Full Scrim Set
- Barn Doors |
$25.00 | 2 | | Arri 1k (LIGHTS)
- Fresnel
- Barn Doors
- Full Scrim Set |
$20.00 | 2 | | Arri 650w (LIGHTS)
- Fresnel
- Barn Doors
- Full Scrim Set |
$15.00 | 2 | | Arri Arrilite 600w (LIGHTS)
- Open Face
- Barn Doors
- Full Scrim Set |
$15.00 | 2 | | Arri 300w (LIGHTS)
- Fresnel
- Barn Doors
- Full Scrim Set |
$15.00 | 2 | | Arri 150w (LIGHTS)
- Fresnel
- Barn Doors
- Full Scrim Set |
$20.00 | 2 | | ETC Source Four 750w (LIGHTS)
- 25º – 50º Zoom Lens
- Gel Holder
- TVMP Yoke Adapter |
$20.00 | 2 | | ETC Source Four 750w (LIGHTS)
- 50º Lens
- Gel Holder
- TVMP Yoke Adapter |
$20.00 | 2 | | ETC Source Four 750w (LIGHTS)
- 19º Lens
- Gel Holder
- TVMP Yoke Adapter |
$0.50 | 4 | | ETC Source Four "B" Pattern Holder (LIGHTS) |
$0.50 Each | See Description | | Gobos for ETC Source Four "B" (LIGHTS)
- 1 x Rosco 77•80 / 980 (Jail Bars)
- 1 x Rosco G-758 (Office Window)
- 1 x Rosco 77508 / 508 (Slate)
- 1 x Rosco 77215 (Louvre)
- 1 x Rosco 811 (Soft Breakup)
- 1 x Rosco 328-203 (Double Hung Window)
- 1 x Rosco 139 (Venetian)
- 1 x Rosco 168 (Cloud 10)
- 1 x Rosco 7702 (Venetian Blind)
- 1 x Rosco 7704 (French Doors)
- 1 x GAM 536 (Georgian Windows)
- 3 x GAM 223 (Large Breakup)
|
$3.00 | 2 | | ETC Source Four Drop-In Iris (LIGHTS)
- 1 x Drop-In Iris
- 1 x "B" Pattern Holder
- 1 x Gel Frame
- 1 x Pancake Snoot |
$15.00 | 2 | | ETC Source Four Mini LED (LIGHTS)
- 19º Lens
- Gel Holder
- Baby Stand Adapter |
$15.00 | 2 | | ETC Source Four Mini LED (LIGHTS)
- 26º Lens
- Gel Holder
- Baby Stand Adapter |
$0.50 | 6 | | ETC Source Four "E" Pattern Holder (LIGHTS) |
$0.50 Each | See Description | | Gobos for ETC Mini Source Four "E" (LIGHTS)
- 2 x Apollo Venetian Blinds Narrow
- 2 x Apollo Window Oblique
- 2 x Apollo Beams 2
|
$15.00 | 4 | | ETC Source Four 575w PAR (LIGHTS)
- Gel Frame
- Narrow 19º
- Medium 21º x 34º
- Wide 30º x 51º
- Extra Wide 31º x 61º
- Lens Case
- Baby Stand Adapter |
$2.00 | 4 | | ETC Source Four PAR Top Hat (LIGHTS)
- 6in |
$2.00 | 4 | | ETC Source Four PAR Barn Door (LIGHTS)
- 4 Leaf |
$5.00 | 8 | | Mini Par Can (LIGHTS)
- 50w
- Gel Frame Holder |
$15.00 | 2 | | Altman 300w (LIGHTS)
- 300L ProLine
- Fresnel
- Barn Doors
- Full Scrim Set |
$20.00 | 4 | | Altman 650w (LIGHTS)
- 650L ProLine
- Fresnel
- Barn Doors
- Full Scrim Set |
$25.00 | 6 | | Altman 1000w (LIGHTS)
- 1000S ProLine
- Fresnel
- Barn Doors
- Full Scrim Set |
$30.00 | 2 | | Altman 2000w (LIGHTS)
-2000S ProLine
- Fresnel
- Barn Doors
- Full Scrim Set |
$25.00 | 1 | | Arri Arrisun 12 Plus Lens Kit (HMI) (LIGHTS)
- 1 x Spot
- 1 x Medium
- 1 x Wide
- 1 x Super Wide
- 1 x Frosted
- 1 x Flight Case |
$200.00 | 3 | | Arri M18 HMI (LIGHTS)
- Power Gems EB180P or Arri High Speed Electronic Ballast
- Up to 10,000fps
- Flicker Free (300Hz and 1000Hz)
- Crystal Locking / Autoscan
- 2 x 50' Head Cable
- Barn Doors
- Full Scrim Set |
$135.00 | 4 | | Arri 1.2k HMI (LIGHTS)
- Fresnel
- Arri 575/1200 EB
- 25'' Head Cable
- Barn Doors
- Full Scrim Set |
$145.00 | 2 | | Cinemills Silver Bullet 1.2k HMI PAR (LIGHTS)
- 575/1200 EB
- 50'' Head Cable
- Barn Doors
- Lens Kit
- Full Scrim Set |
$150.00 | 2 | | K5600 Lighting Joker-Bug 800w HMI (LIGHTS)
- 800w HMI PAR
- Ballast
- Head Cable
- Clear Beaker
- Frosted Beaker
- Barn Doors
- Medium Lens
- Wide Lens
- Super Wide Lens
- Frosted Fresnel Lens
- Scrim Set
- Flight Case |
$125.00 | 5 | | K5600 Lighting Joker-Bug 400w HMI (LIGHTS)
- 400w HMI PAR
- Ballast
- Head Cable
- Clear Beaker
- Frosted Beaker
- Barn Doors
- Medium Lens
- Wide Lens
- Super Wide Lens
- Frosted Fresnel Lens
- Scrim Set
- Flight Case
|
$50.00 | 4 | | K5600 Jo-Leko Bug-A-Beam Adapter (LIGHTS)
- Must Specify 800w or 400w
- 800w comes with Pin Set
- Comes with your choice of one lens ranging from 19º to 50º |
$125.00 | 1 | | Cinemills 575 HMI PAR (Wally Light) (LIGHTS)
- Built in Electronic Ballast
- Barn Doors
- Speed Ring
- Chimera
- Lens Kit
- Full Scrim Set
- Spare Globe |
$200.00 | 1 | | Kino Flo FreeStyle 31 LED DMX Gaffer 2-Light Kit (LIGHTS)
- 2 x Kino Flo Freestyle 31 LED Fixture in Kino Shell
- 2 x Kino Flo LED PSU / DMX Controller with Power Cable
- 2 x Kino Flo Twist-On Mount with 5/8" Baby Receiver
- 2 x 90º Honeycomb Louver
- 2 x 25' Extension Head Cables
- 1 x Flight Case |
$20.00 | 4 | | Nanlite PavoTube II 6C LED Kit (LIGHTS)
- 4 x PavoTube II 6C
- 4 x Baby Pins
- 4 x Wrist Straps
- 4 x USB Cables
- 2 x USB Dual Chargers
- 4 x Egg Crates
- 4 x Soft Sleeve Bags
- 12 x Metal Plates
- 1 x Pitch Fork
- 1 x Accessory Pouch
- 1 x Hard Case
- 2700º - 7500º k
- HSI Mode
- Lighting Effects
- Magnetic Ends
- 1/4-20 Thread
- Internal Battery |
$200.00 | 1 | | Lightstar - LUXED-9 Bi-Color LED Spotlight
- 1 x 1620w Lamphead
- DMX Ready
- 1 x Softbox
- 1 x Full Soft Diffusion
- 1 x Full Silent Grid Diffusion
- Travel Box
- Must Rent Crank Stand with this Fixture
1x Power Cable |
$10.00 | 2 Pair | | LED Tube Ladder (LIGHTS)
- Adjustable for any Length
- 12 Tube Capacity |
$2.00 | 6 | | Quasar Science Magnetic Tube Holders (LIGHTS) |
$35.00 | 18 | | Quasar Science Crossfade 4FT LED (LIGHTS)
- Q50-X (Crossfades)
- 2000-6000k
- 6 x 4' Polarized Bi-Pin Cord
- 2 x Six Tube Cluster Power Adapter
- 2 x Neutrik True 1 Power Adapter (8ft) |
$150.00 | 1 | | Quasar Science Crossfade 4FT LED Kino Retrofit (LIGHTS) (Sioux Falls)
- Q50-X (Crossfades)
- 2000-6000k
- 1 x Kino Flo Retrofit (4ft x 6 Bank)
- 6 x 4' Polarized Bi-Pin Cord
- 2 x Six Tube Cluster Power Adapter
- 1 x 4' 90º Honeycomb Louvre
- 1 x KinoGrip K41 Twist-On Mount with 5/8" Baby Receiver
- 2 x Neutrik True 1 Power Adapter (8ft)
- 1 x Pelican Case |
$150.00 | 2 | | Quasar Science Crossfade 4FT LED Kino Retrofit (LIGHTS) (Rapid City)
- Q50-X (Crossfades)
- 2000-6000k
- 1 x Kino Flo Retrofit (4ft x 6 Bank)
- 6 x 4' Polarized Bi-Pin Cord
- 1 x Power Strip
- 1 x Flouzier
- 1 x KinoGrip K41 Twist-On Mount with 5/8" Baby Receiver
- 1 x Pelican Case |
$25.00 | 12 | | Quasar Science RGB 2FT LED (LIGHTS)
- Q25R RGBX (Rainbow)
- 2000-6000k
- Color and Effects Presets
- 1 x Neutrik PowerCon Cord
- 1 x Pelican Case |
$125.00 | 2 | | Quasar Science RGB 2FT LED Kino Retrofit (LIGHTS)
- Q25R RGBX (Rainbow)
- 2000-6000k
- Color and Effects Presets
- 1 x Kino Flo Retrofit (2ft x 6 Bank)
- 1 x Swivel Mounting Plate with 3/8 Pin
- 1 x Flozier
- 6 x Neutrik PowerCon Cord
- 1 x Power Strip
- 6 x CAT 5 3" Cable
- 1 x Pelican Case |
$2.00 | 8 | | Quasar Tube Floor Stands (LIGHTS)
- Compatible with all T12 Style Quasar Crossfades and RGBX LED Tubes |
$5.00 | 12 | | Quasar Science Q-Block Single (LIGHTS)
- Holds One Quasar Tube with 5/8 Baby Pin
- Lights are Additional / Tube Holder Only |
$10.00 | 2 | | Quasar Science Q-Block Triple (LIGHTS)
- Holds Three Quasar Tubes with 3/8 Pin
- 2 x CAT 5 3" Cable
- Lights are Additional / Tube Holder Only |
$10.00 | 2 | | Quasar Science Q-Block Quad (LIGHTS)
- Holds Four Quasar Tubes with 3/8 Pin
- 3 x CAT 5 3" Cable
- Lights are Additional / Tube Holder Only |
$45.00 | 1 | | Astera NYX LED Bulbs Kit (LIGHTS)
- 8 x NYX LED Bulbs
- 1 x Power Station
- 8x Cup Bouncers
- 8x USB Cables
- 1 x 48VDC PSU
- 1 x Bulb Case |
$175.00 | 1 | | Astera Helios Tube LED Kit (LIGHTS)
- 8 x 2' Helios Tubes
- 16 x Metal Holder
- 16 x R-Clips
- 16 x M5 Eyebolt
- 16 x Double-Ended Spigot
- 8 x 4 Leg Metal Stand
- 4 x Rubber Charging Plugs
- 1 x Charging Case |
$225.00 | 1 | | Astera Helios Tube LED Kit (LIGHTS)
- 8 x 2' Helios Tubes
- 16 x Metal Holder
- 16 x R-Clips
- 16 x M5 Eyebolt
- 16 x Double-Ended Spigot
- 8 x 4 Leg Metal Stand
- 4 x Rubber Charging Plugs
- 1 x Charging Case |
$35.00 | 1 | | AsteraBox ART7 and iPad Kit (LED) (LIGHTS)
- 1 x Transmitter
- 1 x 5-Pin DMX Cable
- 1 x USB Power Cord
- 1 x USB Power Cube
- 1 x Hard Case
- 1 x Apple iPad (in Shell)
- 1 x iPad Holder with Baby Pin
- 1 x USB Cable
- 1 x USB Charger
- 1 x Molded Case |
$15.00 | 8 | | Flo-Control for Astera Helios Tube
- 40º LCD / Soft Grid
- Soft Carrying Pouch |
$20.00 | 8 | | Flo-Control for Astera Titan Tube
- 40º LCD / Soft Grid
- Soft Carrying Pouch |
$2.00 | 16 | | Astera Helios / Titan Tube Single Chargers (LIGHTS) |
$2.00 | 16 | | Astera Helios Tube Magnetic Holder (LIGHTS)
- Metal Holder w/ R-Clip
- Rubber Coated |
$2.00 | 16 | | Astera Titan Tube Magnetic Holder (LIGHTS)
- Metal Holder w/ R-Clip
- Rubber Coated |
$5.00 | 2 | | Lume Cube 1500 Lumen LED (LIGHTS)
- 6000K Color Temperature
- 1 to 1500 Lumen Dimmable Output
- Continuous Output Light
- Strobe Capability for Still Photo Work
- Waterproof to 100'
- 1 x Lume Cube
- 1 x Aluminum Housing
- 4 x Diffusion Bulb Pack
- 3 x Diffusion
- 4 x CTO (Full, 1/2, 1/4, 1/8)
- 4 x Color Gels (Red, Yellow, Green, Blue)
- 1 x USB Charger
- 1 x USB Cord
- 1 x Carrying Case |
$5.00 | 1 Kit | | Spiff-y LED Bracelet
(LIGHTS)
- 4 x Wearable Slap Bracelets
- 2 x RGB + CCT Mode
- 2 x CCT Mode Only
- 4 x Charging Cables
- 2 x Dual USB Chargers
- 1 x Soft Pouch
- Built in Effects
- Car Rigging
|
$10.00 | 2 | | Aputure AL-MW
- 6000k
- IP68
- Waterproof up to 10m
- Rechargeable Battery
- 5 x Lighting Effects
- 3 x CTO Gels (1/4, 1/2, Full)
- 3 x CTB Gels (1/4, 1/2, Full)
- 1 x Diffusion Gel
- 1 x Gel Holder
- 1 x Silicone Rubber Diffuser
- 1 x Type-C Charging Cable
- 1 x Portable Case |
$5.00 | 2 | | Aputure Amaran AL-M9 (LIGHTS)
- 5600k
- 1 x Pocket Sized LED
- Diffusion, CTO, CTB Gels
- 1 x Magnetic Diffusion
- 1 x Cold Shot Mount
- AC/DC Power
- 1 x USB Charger
- 1 x USB Cord
- 1 USB Extension
- 1 x Soft Carrying Case
- 1 x Hard Carrying Case |
$35.00 | 2 | | Aputure MC 4-Light Travel Kit with Charging Case (LIGHTS)
- 4 x MC Light Fixtures
- 1 x Wireless Four-Bank Charging Case
- 1 x Hard-Shell Case
- 1 x Accessory Bag
- 4 x Silicone Rubber Diffuser
- 2 x Mini Cold Shoe Ball Head
- 1 x Charging Case Power Supply
- 1 x Power Cable
- 1 x 1/4"-20 Screw kit |
$200.00 | 4 | | Aputure LS 1200D Pro Lamp Head (V-Mount)
- 1 x Control Box
- 1 x BM1215 Narrow Hyper Reflector
- 1 x BM1230 Medium Hyper Reflector
- 1 x BM1245 Wide Hyper Reflector
- 1 x LED Protective Cover
- 1 x Weatherproof Head Cable
- 1 x Neutrik AC Cable
- 1 x Lightning Clamp
- 1 x Rolling Carry Case
- 1 x Reflector Carrying Case |
$150.00 | 4 | | Aputure LS 600x Pro Lamp Head (V-Mount)
- 1 x Control Box
- 1 x Hyper Reflector
- 1 x Hyper Reflector Cover
- 1 x LED Protective Cover
- 1 x V-Mount Dual Battery Plate
- 1 x Weatherproof Head Cable
- 1 x Neutrik AC Cable
- 1 x VA Remote RC1+
- 1 x Lightning Clamp
- 1 x Rolling Carry Case |
$75.00 | 4 | | Aputure LS 300x Bi-Color LED Light (V-Mount) (LIGHTS)
- 1 x Light Storm LS 300X Beyond Bi-Color LED Light
- 1 x V-Mount Battery Plate
- 1 x 55 Degree Hyper-Reflector
- 1 x Hyper Reflector Cover
- 1 x LED Protection Cover
- 1 x Control Box
- 1 x Quick Release Lightning Clamp
- 1 x Neutrik powerCON AC Power Cable
- 2 x 5-Pin Male-to-Female XLR Head Cable
- 1 x Cable Relief Hook
- 1 x Carrying Case |
$35.00 | 4 | | Aputure F10 Glass Fresnel Lens (LIGHTS)
- 1 x Lens
- 1 x Soft Carrying Case
- 1 x Barn Doors
- 1 x Black Reflector Dish
- 2 x Carrying Cases |
$15.00 | 4 | | Aputure Fresnel 2X Mount for Light Storm (LIGHTS)
- 1 x Lens
- 1 x 30º LCD
- 1 x Gel Frame
- 1 x Barn Doors
- 1 x Black Reflector Dish
- 1 x Hard Carrying Case |
$15.00 | 2 | | Aputure Spotlight Mount Set 36 Degree Lens (LIGHTS)
- 1 x Spotlight Mount
- 1 x 36º Lens
- 1 x Gel Holder
- 1 x Gobo Holder
- 3 x Gobos
- 1 x Lens Pen
- 1 x Blower
- 1 x Micro-Fiber Cloth
- 1 x Case |
$10.00 | 2 | | Aputure Spotlight 26º Lens
- 26º Lens
- Gel Frame Holder
- Soft Case |
$10.00 | 2 | | Aputure Spotlight 19º Lens
- 19º Lens
- Gel Frame Holder
- Soft Case |
$10.00 | 4 | | Aputure Light Box (LIGHTS)
- 30×120cm Rectangular Strip Softbox
- Speed Ring
- 1 x Inner Diffusion
- 1 x 1.5 Diffusion
- 1 x 2.5 Diffusion
- 1 x 45º LCD
- 1 x Carrying Bag |
$15.00 | 2 | | Aputure Lantern 90 / China Ball (LIGHTS)
- 3' Diameter
- 1 x Lantern
- 1 x Skirt
- 1 x Carrying Bag |
$10.00 | 4 | | Aputure Lantern 360 -Degrees Softbox / China Ball (LIGHTS)
- 2.2' Diameter
- 1 x Lantern
- 1 x Skirt
- 1 x Carrying Bag |
$10.00 | 4 | | Aputure Light Dome II (LIGHTS)
- 34.8" Diameter
- 16 x Rods
- 2 x Front Diffusers
- 1 x Interior Diffuser
- 1 x Bowens Speed Ring
- 1 x 40 Degree Grid
- 1 x Gel Filter Holder
- 1 x Carrying Bag |
$15.00 | 4 | | Aputure Light Dome 150 (LIGHTS)
- 5' Diameter
- 16 x Rods
- 2 x Front Diffusers
- 1 x Interior Diffuser
- 1 x Bowens Speed Ring
- 1 x 40 Degree Grid
- 1 x Gel Filter Holder
- 1 x Carrying Bag |
$10.00 | 5 | | Space Light Diffuser for LED Lighting (LIGHTS)
- 24 x 36"
- 1 x Soft Pouch |
$50.00 | 6 | | Aladdin Bi-Flex1 Lite 1x1' Bi-Color LED (LIGHTS)
- 1 x Bi-Flex 1 LED Panel
- 1 x Dimmer / Control Unit
- 1 x Gold Mount Battery Plate
- 1 x X-Bend Holder
- 1 x AC Power Supply and Power Cord
- 1 x Extension Head Cable (16ft/5m)
- 1 x Ball Head Stand Mount
- 1 x Aladdin Baby Stand |
$5.00 | 4 | | Aladdin Softbox for Bi-Flex1 Lite (LIGHTS)
- 4 x Panel Sides for Softbox
- 1 x Diffuser
- 1 x Soft Grid / LCD |
$5.00 | 6 | | Aladdin Snoot for Bi-Flex1 Lite (LIGHTS)
- 1 x Snoot
- 1 x Diffuser |
$300.00 | 1 | | Aladdin Bi-Flex1 Lite 1x1' Bi-Color LED 6-Light Rental Kit (LIGHTS)
- 6 x Bi-Flex 1 LED Panels (3-Per Soft Pouch)
- 6 x Dimmer / Control Units
- 6 x Gold Mount Battery Plates
- 6 x X-Bend Holders
- 6 x AC Power Supplies and Power Cords
- 6 x Extension Head Cables (16ft/5m)
- 6 x Ball Head Stand Mounts
- 6 x Aladdin Baby Stand
- 4 x Softboxes with Diffusers
- 6 x Snoots with Diffusers
- 4 x Soft Grid / LCD (in Soft Pouch)
- 1 x Accessory Bag
- 1 x Hardware Bag |
$1.25 | 4 | Twinkle / Fairy Lights | Twinkle / Fairy LED Lights (LIGHTS)
- 1 x Copper Wire LED Lights
- DC Power (4 AA Batteries)
- Twinkle Presets |
$3.00 | 6 | | FEIT Electric Smart WiFi Bulb (LIGHTS)
- LED 100w
- RGBW
- Controlled from Smart Phone App |
$2.00 | 4 | | Luxon LED Flame Light Bulb (LIGHTS)
- 1300k
- Three Flame Light Modes
- E26 Base |
$10.00 | 2 | | Fotodiox Pro LED-312DS Bi-Color LED Photo Video Light Kit
(LIGHTS)
- 3200K-5600K
- 1 x Barndoors
- 1 x Flozier
- 1 x Cold Shoe
- 1 x Tota-Tilter
- 1 x Charger
- AC/DC Power Cord
- 4 x Batteries
- 1 x Car Adapter |
$10.00 | 2 | | Yongnuo YN360 LED Light Wand (LIGHTS)
- Bi-Color
- RGB
- AC/DC Power
- 2 x Batteries
- 1 x AC Power Cord
- 1 x Single Charger
- 1 x Delvcam Swivel Mount Adapter with Baby Pin |
$150.00 | 2 | | Litepanels Gemini 2x1 RGBWW (LIGHTS)
- LED 2700K - 6,000K
- DMX Capable
- Wireless Bluetooth Dongle
- PowerCON Power Cable
- Portabrace Soft Case
- 60º Grid |
$25.00 | 1 | | Litepanels Snapbag Softbox for 2x1 Gemini (LIGHTS) |
$25.00 | 1 | | POWRIG Softbox with Grid for 2x1 Litepanels Gemini (LIGHTS) |
$100.00 | 4 | | Litepanels Gemini 1x1 RGBWW (LIGHTS)
- LED 2700K - 6,000K
- DMX Capable
- Power Cord in Soft Pouch
- Litepanels Carrying Case
- 40º SnapGrid w/ Soft Pouch |
$10.00 | 2 | | Litepanels Gemini 1x1 RGBWW (LIGHTS)
- V-Mount Plate Adapter |
$50.00 | 2 | | Litepanels Astra 1x1 (4x) Bi-Color LED (LIGHTS)
- Power Supply
- Power Cord
- V-Mount Adapter
- D-Fuse Softbox with 40º LCD in Bag
- Litepanels Carrying Case |
$50.00 | 2 | | Litepanels Astra 1x1 Soft Bi-Color LED
- 3200k to 5600k
- Frame Holders
- Power Supply
- V-Mount Adapters
- Power Cord
- Battery Power Cords
- Soft Pouch for Cables
- Carrying Case
- D-Fuse Softbox Included if Requested |
$10.00 | 4 | | D-Fuse Collapsible Trapezoid Cylinder Softbox for LED 1x1 Light Panels
- Pop-Up Soft Box (In Pouch)
- Built in Diffusion
- 4 x Velcro Scraps
- 40º LCD Grid in Pouch
- Soft Carrying Case |
$50.00 | 1 | | Litegear LiteMat 1 S2 Hybrid Kit (LIGHTS)
- 1 LiteMat 1 S2 Hybrid Fixture
- 1 x Louver
- 1 x Mounting Plate
- 1 x Polyskirt Frame
- 1 x Full Diffusion
- 1 x Half Grid
- 1 x Quarter Grid
- 1 x Power Supply
- 1 x Dimmer / Kelvin Temp
- 1 x Power Cord
- 1 x Power Supply and Dimmer Holder
- 1 x 12’ Head Cable
- 1 x Carrying Case
- 1 x Small Tool Pouch
- 2 x Screw Drivers
- 1 x Remote Trigger
- 1 x 3” LED Lite Ribbon |
$50.00 | 2 | | Intellytech LiteCloth LC-160 RGBW LED (LIGHTS)
- RGBW Variable Color
- 3000-10,000K
- 1 x Foldable 2 x 2 LED Mat
- 1 x Controller/Ballast w/ V-Mount Battery Plate
- 1 x AC Adapter
- 1 x Mounting Bracket w/ 5/8 Receiver
- 1 x 5/8 Receiver Elbow Arm
- 1 x Softbox w/ Diffuser
- 1 x 45º Grid
- 1 x Hard Carry Case
- Folds Down to 12 x 12" Square for Travel
- DMX Ready
|
$75.00 | 1 | | Chimera Daylite Plus 1 Large Softbox with Speed Ring for Arri M18 (LIGHTS)
- 54" x 72"
- 12,000w Max
|
$15.00 | 1 | | Photoflex Silverdome FV Large Softbox (Chimera)(LIGHTS)
- 34" x 45"
- 1000w Max
- 1 x Full Diffusion |
$15.00 | 1 | | Chimera Video Pro Plus Medium Softbox (LIGHTS)
- 36" x 48"
- 1200w Max
- 2 x Full Diffusion
- 1 x Interior Baffle |
$15.00 | 1 | | Chimera Quartz Plus Small Softbox (LIGHTS)
- 24" x 32"
- 4000w Max
- 1 x Full Diffusion
- 1 x 1/2 Diffusion
- 1 x 1/4 Diffussion
|
$15.00 | 1 | | Chimera Video Pro Plus Small Softbox (LIGHTS)
- 24" x 32"
- 1000w Max
- 3 x Full Diffusions
- 1 x Interior Baffle |
$15.00 | 1 | | Chimera Video Pro Plus Small Softbox (LIGHTS)
- 24" x 32"
- 1000w Max
- 1 x Full Diffusion
- 1 x 1/2 Diffusion
- 1 x Interior Baffle
|
$15.00 | 2 | | Chimera Video Pro Plus Small Softbox (LIGHTS)
- 24" x 32"
- 1000w Max
- 1 x Full Diffusion
- 1 x 1/2 Diffusion
- 1 x 1/4 Diffusion
- 1 x Interior Baffle
- 1 x 40º Grid
|
$3.00 | 2 | | Chimera / Photoflex Speed Ring (LIGHTS)
- Works with:
- Joker Bug 400w
- Joker Bug 800w |
$3.00 | 2 | | Chimera / Photoflex Speed Ring (LIGHTS)
- Circular, 6.58"
- Works with:
- Mole Richardson #3081
- Arri 650w
- Joker Bug 400w |
$3.00 | 1 | | Chimera / Photoflex Speed Ring (LIGHTS)
- Non-Circular, 7.75"
- Works with:
- Mole Richardson #4081
- Arri 1000w Open Face
|
$3.00 | 1 | | Chimera / Photoflex Speed Ring (LIGHTS)
- Circular, 7.75"
- Works with:
- Mole Richardson #4081
- Arri 1000w Open Face |
$3.00 | 1 | | Chimera / Photoflex Speed Ring (LIGHTS)
- Adjustable 5" to 9"
- Works with:
- Mole Richardson #5291
- Mole Richardson #3081
- Mole Richardson #4018
- Mole Richardson #4821
- Mole Richardson #4051
- Mole Richardson #3131
- Arri LC-7
- Arri 1000w Fresnel
- Arri 1000w Open Face
- Arri 650w
- Arri 300w
- Joker Bug 800w |
$35.00 | 1 | | Police Lights (LIGHTS)
- Older Style (Non LED)
- Comes with Light Control Box
- Siren is Disabled |
$5.00 | 1 | | Noga Cine Arm (Israeli)
- 1/4-20 to 1/4-20 |
$5.00 | 1 | | Noga Cine Arm (Israeli)
- 1/4-20 to 3/8 |
$3.00 | 1 | | Insert Camera Slate (Dry Erase)
- 4 x 6 |
$5.00 | 3 | | Camera Slate / Clapper (Dry Erase) |
$3.00 | 1 | | 22 Piece Camera/Tripod Screw Adapter Kit (CAMERA SUPPORT)
- 2 x 1/4-20" Plate Screw
- 5 x 3/8" Male to 1/4-20" Male
- 5 x 1/4-20" Female to 3/8" Male
- 5 x 1/4-20" Male to 1/4-20" Male
- 5 x 3/8" Female to 1/4-20" Female |
$5.00 | 2 | | 31 Piece Camera/Tripod Screw Adapter Kit (CAMERA SUPPORT)
- 5 x 1/4-20 Male to 3/8 Male
- 5 x 1/4-20 Male to 1/4-20 Male
- 5 x 1/4-20 Female to 3/8 Female
- 5 x 1/4-20 Female to 3/8 Male (A)
- 5 x 1/4-20 Female to 3/8 Male (B)
- 2 x 1/4-20 Camera Screw
- 2 x 3/8 Camera Screw
- 1 x 1/4-20 Hot Shoe Adapter
- 1 x 1/4-20 / 3/8 Spiggot
- 1 x Case |
$10.00 | 3 | | 100mm Hi-Hat (CAMERA SUPPORT) |
$3.00 | 3 | | Hi-Hat 100mm to 75mm Adapter (CAMERA SUPPORT) |
$10.00 | 1 | | Mitchell Low-Hat (CAMERA SUPPORT) |
$10.00 | 1 | | Mitchell Hi-Hat (CAMERA SUPPORT) |
$50.00 | 2 | | Camgear V25P CF Fluid Head and Tripod Kit (CAMERA SUPPORT)
- 70 lb Max Capacity
- 100mm Ball Fluid-Head
- 8-Step Pan & Tilt Drag Including “Zero”
- Selectable 9-Position Counterbalance
- Telescoping Pan / Tilt Bar
- Mini Quick-Release Plate Included
- Illuminated Bubble-Level
- Sliding Balance Plate
- 2-Stage Carbon Fiber Tripod
- Ground-Level Spreader
- SB-3 Tripod Soft Carrying Case
|
$30.00 | 1 | | Camgear V12 CF Fluid Head and Tripod Kit (CAMERA SUPPORT)
- 26 lb Max Capacity
- 100mm Ball Fluid-Head
- 6-Step Pan & Tilt Drag Control
- Selectable 8-Position Counterbalance
- Telescoping Pan / Tilt Bar
- Mini Quick-Release Plate Included
- Illuminated Bubble-Level
- Sliding Balance Plate
- 2-Stage Carbon Fiber Tripod
- Mid-Level Spreader
- SB-2 Tripod Soft Carrying Case |
$25.00 | 1 | | Bogen 3181 Tripod with 3066 Fluid Head (CAMERA SUPPORT)
- 20lb Max Capacity
- Sliding Release Plate
- 2-Stage Aluminum Tripod
- Pan / Tilt Bar
- Soft Carrying Case |
$15.00 | 1 | | Manfrotto Monopod (CAMERA SUPPORT)
- 561 BHDV Fluid Head
- Sliding Release Plate
- 8.8 lbs Load Capacity |
$10.00 | 1 | | Bogen 3011 Tripod with Head (CAMERA SUPPORT) |
$15.00 | 1 | | Bogen 3198 Camera Dolly (CAMERA SUPPORT) |
$30.00 | 1 | | OConnor Cine HD Baby Tripod (CAMERA SUPPORT)
- Mitchell Mount
- Aluminum Alloy Tripod Legs
- Supports 309lbs Max Capacity |
$35.00 | 1 | | Ronford Baker HD Tripod (CAMERA SUPPORT)
- Tall Standard Legs
- Mitchell Mount
- Protective Rubber Foot Caps
- Off-Ground Spreader
- Supports 200lbs Max Capacity |
$5.00 | 1 | | SmallRig 12" Dovetail (CAMERA SUPPORT)
- DP-12X |
$5.00 | 2 | | Sony VCT-U14-F Quick Release Plate (CAMERA SUPPORT) |
$12.00 | 1 | | Cinesaddle (CAMERA SUPPORT)
- Car Mounting Kit |
$2.00 | 2 | | 1.5" Speed Rail Starter
(CAMERA SUPPORT)
- 2" with 3/8 Female Thread |
$3.00 | 12 | " | 1.5" Speed Rail Starter
(CAMERA SUPPORT)
- 3.5" with 3/8 Female Thread |
$5.00 | 6 | | 1.5" Speed Rail Starter
(CAMERA SUPPORT)
- 5" with 5/8 Receiver |
$6.00 | 4 | | 1.5" Speed Rail Starter
(CAMERA SUPPORT)
- 8" with 3/8 Female Thread |
$2.00 | 10 | | Small Bicycle Starter with 3/8 Male Thread
(CAMERA SUPPORT) |
$2.00 | 10 | | Large Bicycle Starter with 3/8 Male Thread
(CAMERA SUPPORT) |
$1.00 | 2 | | Round Body Starter
(CAMERA SUPPORT)
- 3/8" Male Thread
- Short |
$1.00 | 2 | | Round Body Starter
(CAMERA SUPPORT)
- 3/8" Male Thread
- Long |
$1.00 | 2 | | Round Body Starter
(CAMERA SUPPORT)
- 3/8" Male Thread
- Large |
$1.00 | 2 | | Round Body Starter
(CAMERA SUPPORT)
- 3/8" Male Thread
- Small |
$1.00 | 2 | | Mini-Flat Body Starter
(CAMERA SUPPORT)
- 3/8" Male Thread
- Long |
$1.00 | 2 | | Mini-Flat Body Starter
(CAMERA SUPPORT)
- 3/8" Male Thread
- Short |
$2.00 | 2 | | Wider Uni-Body Pinch Clamp for Speed-Rail Starter
(CAMERA SUPPORT) |
$2.00 | 2 | | Uni-Body Pinch Clamp (CAMERA SUPPORT)
- 3/8" Male Thread |
$2.00 | 2 | | Uni-Body Pinch Clamp Tie Down
(CAMERA SUPPORT) |
$1.00 | 4 | | Stainless Steel Hollow Rod (5/8")
(CAMERA SUPPORT)
- 4"
|
$1.25 | 4 | | Stainless Steel Hollow Rod (5/8")
(CAMERA SUPPORT)
- 8"
|
$1.50 | 4 | | Stainless Steel Hollow Rod (5/8")
(CAMERA SUPPORT)
- 12"
|
$1.75 | 4 | | Stainless Steel Hollow Rod (5/8")
(CAMERA SUPPORT)
- 20"
|
$2.00 | 4 | | Stainless Steel Hollow Rod (5/8")
(CAMERA SUPPORT)
- 24"
|
$2.25 | 4 | | Stainless Steel Hollow Rod (5/8")
(CAMERA SUPPORT)
- 30"
|
$2.50 | 4 | | Stainless Steel Hollow Rod (5/8")
(CAMERA SUPPORT)
- 36"
|
$0.50 | 4 | | Eye Bolt Camera Rigging (CAMERA SUPPORT)
- 1/4-20 |
$0.50 | 2 | | Eye Bolt Camera Rigging (CAMERA SUPPORT)
- 5/16-18 |
$0.50 | 2 | | Eye Bolt Camera Rigging (CAMERA SUPPORT)
- 3/8-16 |
$1.00 | 1 | | Wide Gutter Hook (CAMERA SUPPORT) |
$1.00 | 8 | | Gutter Hook (CAMERA SUPPORT) |
$1.00 | 4 | | Fender Hook (CAMERA SUPPORT) |
$25.00 | 1 | | Mitchell to Speed Rail Adapter (1 ½) (CAMERA SUPPORT)
|
$75.00 | 1 | | Gremsy Quad Vibration Isolator (CAMERA SUPPORT)
- 24-32kg Load Capacity (52-70lbs)
- Underslung: 32kgs / 70lbs
- Overslung: 28kgs / 60lbs Max
- 1 x Quad Vibration Isolator
- 1 x Mitchell Plate
- 1 x Mitchell Mount
- 1 x Castle Nut
- 1 x Universal Base Plate
- 4 x Anti-Vibration Cables
- 4 x Rubber Coated Anti-Vibration Cables
- 15 x 1/2" Socket Head
- 22 x 1/4" Socket Head
- 1 x Mitchell Key Extender
- 1 x Allan Key
- 1 x Mitchell Wrench
- 2 x Pouches
- 1 x Hard Case
|
$75.00 | 1 | | Custom Easy Vibration Isolator (Camera Support)
1 x 20-30kgs Vibration Isolator with Male & Female Mitchell (44-66lbs)
- Underslung: 20 – 30kgs / 44 – 66lbs
- Overslung: 25kgs / 55lbs Max
- 1 x Universal Gimbal Plate
- 1 x Carrying Case
|
$250.00 | 1 | | Custom Easy Raptor Z Pro Rental Kit (CAMERA SUPPORT) (Black Arm)
1 x Raptor Z Pro
1 x Arm to Male Mitchell
1 x Quick Release
1 x Universal Gimbal Plate
1 x 8-20kgs Vibration Isolator with Male & Female Mitchell (17-44lbs)
- Underslung: 10 – 20kgs/ 22 – 44lbs
- Overslung: Max 15kgs/33lbs
1 x Raptor Z Arm Bump Stop (Pair)
1 x 24" Speed Rail 1-1/2" Schedule 40 Aluminum
2 x Carrying Case |
$25.00 | 1 | | CineMilled Billet Trailer Hitch Adapter (CAMERA SUPPORT)
- 2" Receiver
- 1.5" Speed Rail Tube
- 4 x Houdini Speed Rail Clamps
- 4 x Shims for 1.25 Speed Rail |
$25.00 | 1 | | Tilta Front Tow Hook Adapter
- Double-Head Wrench
- For Speed Rail Car Mounting Kit
|
$15.00 | 1 | | Compact Car Mounting Kit (CAMERA SUPPORT)
- 33lb Max Capacity
- Triangle Cheese Plate with three Baby Pins (5/8)
- Manfrotto 438 Compact Leveling Head
- Manfrotto 577 Rapid Connect Adapter
- Sliding Mounting Plate (501PL)
- 1 x 1/4-20 Camera Screw
- 1 x 3/8-16 Camera Screw |
$85.00 | 1 | | Modern Studio Deluxe Mitchell Mount Hostess Tray Complete (CAMERA SUPPORT)
- Includes:
- 3 x Ratchet Straps
- 1 x Furni Pad
- 4 x Tennis Balls
- 1 x Tote |
$85.00 | 1 | | Matthews Hood Mount Kit (CAMERA SUPPORT)
- 1 x Low Profile Leveling Head
- 1 x Slide Plate
- 2 x Work Horse Clamps
- 4 x Standard Screw Jacks with Large Leveling Pads
- 4 x Extended Screw Jacks with Large Leveling Pads
- 5 x Tie Down Straps
- 2 x Baby Grid Clamps
- 2 x Junior Grid Clamps
- 4 x 90° Clamps
- 2 x Swivel Clamps
- 2 x Safety Straps
- 2 x 3/8x2-3/4 Locking Carabiners (WLL 160lbs)
- 1 x 9/16" Ratcheting Wrench
- 1 x C-Wrench
- 2 x Cases |
$15.00 | 1 | | Camera Wedge Plate (CAMERA SUPPORT)
- Adjustable 0º-90º |
$25.00 | 1 | | 4-Way Leveller - Mitchell to Mitchell
- Bazooka / Elemac Attachment Included
- Castle Nut Wrench
- 5mm Allen Key
- Hard Case |
$8.00 | 1 | | 12" Camera Riser (CAMERA SUPPORT)
- Mitchell Mount
- Castle Nut |
$15.00 | 1 | | Adjustable Mitchell Camera Riser (CAMERA SUPPORT)
- 2" Riser (x3)
- 3" Riser (x4)
- 10.5" Riser (x4)
- Carrying Case |
$12.00 | 1 | | 36" Camera Offset (CAMERA SUPPORT)
- Mitchell Mount
- Castle Nut |
$1.00 | 2 | | Mitchell Washer 1" (CAMERA SUPPORT) |
$5.00 | 2 | | Mitchell to 100mm Bowl Adapter (CAMERA SUPPORT)
- Mitchell Key
- Washer
- Soft Case |
$2.00 | 2 | | Mitchell Wrench |
75.00 | 1 | | Travato Tote Jib (In Road Cases) (CAMERA SUPPORT)
- Conventional or Underslung Capabilities
- 50lb Load Capacity
- 1 x 4ft Arm (Main Section)
- 1 x Pedestal Base
- 1 x Studio Base Plate to Dolly Wheel Adapter
- 2 x Fixed No-Flat Tires
- 1 x Swivel No Flat Tire
- 1 x Pull Bar Handle
- 1 x Balanced Pan Head
- 1 x Tripod Head Pan Handle
- 1 x 100mm Bowl
- 1 x Receiver Head
- 1 x Manfrotto Rapid Connect Adapter
- 1 x Sliding Mounting Plate
- 1 x 1/4-20 Camera Screw
- 1 x 3/8-16 Camera Screw
- 1 x 4 1/2" Tie Down with Collar
- 2 x 2 1/2" Tie Down with Collar
- 1 x Tie Down Collar
- 1 x Tie Down Spacer
- 1 x Weight Bar
- 2 x Retaining Weight Collars
- 2 x 25lb Counter Weights
- 2 x 10lb Counter Weights
- 2 x 3lb Counter Weights
- 1 x 10lb Sandbag
- 2 x 5lb Sandbags
- 1 x 1/2" and 9/16" Wrench
- 4 x Allen Wrenches
- 3 x Flat Head Socket Cap Screws
- 3 x Socket Head Cap Screws
- Zip Ties and Velcro for Cable Runs
- 3 x Instruction and Parts Manuals |
$125.00 | 1 | | Losmandy Standard Porta-Jib (CAMERA SUPPORT)
- 100lb Load Capacity
- 6ft Arm
- 1 x Front Assembly
- 1 x Mitchell Front Insert
- 1 x 100mm Adapter
- 3-Way Leveler
- 1 x Center Assembly Mitchell Mount
- 1 x 3' Main Tube
- 1 x Secondary Arm
- 1 x 36” Extension Secondary Arm
- 1 x Joining Piece for 36" Extension Kit
- 1 x 18” Extension Tube
- 1 x 18” Extension Inner Tube
- 1 x Vector Bar
- 1 x Boom Lock Assembly
- 1 x LWT 12" Riser
- 3 x LWT Riser Locking Knobs
- 6 x Locking Knob
- 4 x Through Pin for Maintube
- 1 x 1.5" Steel Weight Bar
- 1 x 3” Steel Weight Bar
- 1 x Steel Bar Cap
- 4 x Tube Clamp
- 1 x Lightweight Adjustable Tripod with LWT Top
- 2 x Alan Keys
- 1 x Weight Shaft Coupler
- 2 x Weight Shaft
- 4 x Third Weight Shaft Lock
- 6 x Washers to Secure Weights
- 1 x Fine Tuning Weight
- 2 x 2.5lb Barbell Weights
- 4 x 5lb Barbell Weight
- 5 x 10lb Barbell Weight
- 1 x The Losmandy® Spider Dolly Extended Leg Version
- 8 x Locking Knobs for Spider Dolly Wheels
- 1 x 5 Wheel Adapter for Spider Dolly
- 1 x Porta-Jib Standard Case with Wheels
- 1 x Case w/ Wheels for LW Tripod
- 1 x Case for LW Tripod and Riser |
$25.00 | 1 | | Platform Dolly (CAMERA SUPPORT)
- Sits in the Skate Wheels Tray for Dolly Moves |
$50.00 | 3 | | Dana Dolly Rental Kit (Speed Rail and Stands Additional
(CAMERA SUPPORT)
- 1 x Dana Dolly
- 2 x Track End Brackets
- 1 x Center support bar
- 2 x Anti-Tip Brackets
- 1 x Monitor adapter with Ball Head
- 75mm, 100mm and 150mm Bowl Adapters
- 1 x Multi-tool
- 2 x #2 Grip Clips
- 8” Spirit Level
- 1x Dana Dolly Washer
- 1 x Mitchell Washer
- 1 x Custom wheeled SKB Case |
$15.00 | 1 | | Matthews 24" Bazooka
(CAMERA SUPPORT) |
$15.00 | 1 | | Matthews to Elemack 5" Riser 100mm Bowl Adapter (CAMERA SUPPORT) |
$10.00 | 1 | | Manfrotto 494 Center Ball Head (CAMERA SUPPORT)
- 1/4-20 on Round Disc
- 17lb Load Capacity |
$10.00 | 1 | | Manfrotto 503HDV Fluid Head (CAMERA SUPPORT)
- 1 x Pan Arm
- 1 x Quick Release Plate
- 1 x 1/4-20 Camera Screw
|
$50.00 | 2 | | Matthews Roundy Round Doorway Dolly (CAMERA SUPPORT) |
$20.00 | 2 Pair | | Skate Wheels Kit (for Doorway Dolly) (CAMERA SUPPORT) |
$20.00 | 2 Kits | | Matthews Hot Button Wheels (for Doorway Dolly) (CAMERA SUPPORT)
- 4 x Hot Button Wheels per kit |
$35.00 | 1 | | Apple Box Dolly / Butt Dolly
- Ultra Silent Precision Wheels
- Base with Mitchell Mount
- Slots for all Apple Box Positions
- 3/8" Threaded Female Holes
- 20" long x 14" wide x 5" tall
- Made with 6061-T6 Aluminum
- Includes one standard Apple Box
- Includes one Seat Cushion |
$8.00 | 3 | | 4' Straight Steel Dolly Track (CAMERA SUPPORT) |
$10.00 | 6 | | 8' Straight Steel Dolly Track (CAMERA SUPPORT) |
$12.00 | 9 | | Curved 45° Steel Dolly Track (CAMERA SUPPORT) |
$12.00 | 3 | | Curved 90° Steel Dolly Track (CAMERA SUPPORT) |
$12.00 | 1 | | Full Basso Blocks
- 10 Piece Set |
$12.00 | 1 | | Half Basso Blocks
- 10 Piece Set |
$12.00 | 3 | | Full Elephant Basso Blocks
- 10 Piece Set |
$12.00 | 3 | | Half Elephant Basso Blocks
- 10 Piece Set |
$6.00 | 3 | | Crate of Wedges (70 pieces) |
$6.00 | 3 | | Crate of Cribbing (50 pieces) |
$10.00 | 1 | | Selens Photography Prisms
- 1 x 130mm Triangular
- 1 x 60mm Ball
- 1 x 50mm Cube
- 1/4-20 Thread
- 1 x 1/4-20 Baby Pin
- 2 x Lens Cloth
- 1 x Case |
$10.00 | 1 | | 30x36 UltraBounce Monitor Tent (CAMERA SUPPORT)
- Carrying Bag
- 4 x Weighted Poles for Extra Ridgedy |
$50.00 | 1 | | Osee / Swit G7 7 Inch Ultra-Bright HDR Field Monitor (CAMERA SUPPORT)
- 3000 Nits
- 1920×1200 Full HD 3G SDI 4K HDMI
- SDI In / Out
- HDMI In / Out
- 1 x Mini Israeli Arm
- 1 x Articulating Arm Trestle
- 1 x P-Tap / D-Tap Cable Power Adapter
- 1 x AC Power Cord
- 1 x V-Mount Battery Plate w/ 4 x Screws
- 1 x Sunshade
- 2 x 1.5' Slim SDI Right Angle Cable
- 1 x 1.2' Coiled HDMI Right Angle Cable
- 4 x 7800mAh NP Batteries
- 4 x Battery Charging Cables
- 1 x Dual USB Charging Cube
- 1 x Nitze Sun Hood
- 1 x Nitze Monitor Cage
- 1 x Nitze Cage Strap
- 4 x Cage Screws
- 2 x Cage Handles
- 1 x Baby Pin (Male Thread)
- 2 x Allen Keys
- 1 x Cold Shoe Mount
- 1 x 1/4-20 Female Adapter
- 2 x Soft Accessory Bags
- 1 x Hard Case |
$100.00 | 1 | | Panasonic BT-L2150P 21.5" Video Production Monitor (CAMERA SUPPORT)
- 1 x Video: BNC
- 3 x Y/PB/PR: BNC
- 2 x SDI: BNC
- 1 x HDMI: HDMI
- Matthews Monitor Mount
- Road Case |
$150.00 | 1 | | Atomos Sumo 19m Video Production Monitor (CAMERA SUPPORT)
- 1200 NITS
- Sun Hood
- 1 x HDMI (Input)
- 1 x HDMI (Output)
- 4 x HD-SDI (Input)
- 1 x HD-SDI (Output)
- AC Power Supply
- Baby/Junior Monitor Mount
- Battwing w/ Dual IndiPro V-Mount Plates w/ XLR Cables
- Pelican Case |
$2.00 | 2 | | Battery Holder Stand Adapter (CAMERA SUPPORT)
- Connects to stand with a Mafer Clamp
- For gear without Battery Plates
- Battery Power for gear via P-Tap / D-Tap |
$10.00 | 1 | | Accsoon CineEye Wireless Video (CAMERA SUPPORT)
- 5G Wireless Live Transmission to 4 Devices
- 1080p WiFi HDMI
- 100 Meter Range
- Supports Android & iOS
- RGB, 3D LUT Loading
- 1 x 8" HDMI Cable
- 1 x 8" Mini HDMI Cable
- 1 x 8" Micro HDMI Cable
- 1 x 24" Charging Cable
- 1 x Transmitter
- 1 x Cold Shoe Mount
- 1 x USB Charging Block
- 1 x Soft Accessory Pouch
- 1 x Hard Case |
$40.00 | 1 | | Hollyland Mars 400S PRO (CAMERA SUPPORT)
- Wireless SDI / HDMI Video Transmitter and Receiver
- 1 x Transmitter
- 1 x Receiver
- 6 x Antenna
- 4 x Omni Directional Antenna
- 2 x 1.5' Slim SDI Right Angle Cable
- 2 x 1.2' Coiled HDMI Cable
- 4 x 7800mAh NP Batteries
- 4 x Battery Charging Cables
- 1 x Dual USB Charging Cube
- 1 x AC Power Cord
- 2 x Ball Head w/ 1/4-20 Thread
- 1 x Hard Case |
$600.00
**Teleprompter Operator Included
$200.00
**Teleprompter Only
**There is a stand adapter available, but Beefy Baby Stands are extra.
**Tripod Not Included. If you use your own Tripod, the head should have a minimum load capacity of 30-35lbs since lighter capacity heads cannot handle the weight since it is not centered. | 2 | | Teleprompter System (1100nits High Bright) (CAMERA SUPPORT)
- Price Includes Teleprompter Operator
- 1 x 17" Prompter Monitor w/ Mount
- 1 x 60/40 Trapezoidal-Shaped Beamsplitter Glass Unit
- 1 x Tripod Mount
- 1 x Beefy Baby Stand Mount and Adapter
- 1 x Dual Height Block Riser Back Sled
- 1 x Monitor Mount
- 1 x Power Cord and Power Supply
- 1 x 3' DVI Cable
- 1 x DVI to Mini Display Port Adapter
- 2 x Coax Cable
- 1 x VGA to VGA Cable
- 1 x S-Video Cable
- 1 x Allan Key
- 14 x Mount Machine Screws
- 1 x Monitor Remote Control
- 1 x Power Prompter Express Software
- 1 x 11" Macintosh MacBook Air w/ Power Cord
- 1 x Soft Case for MacBook
- 1 x Power Strip
- 1 x Plastic Tote for Cables
- 1 x Storm Case iM3075 |
$2.00 | 1 | | Ultrak 410 Simple Event Timer Stopwatch With Silent Operation |
$2.00 | 1 | | Golden Child Solar Pak
- External USB Battery for Cell Phones
- 1 x Charging Cable |
$75.00 | 1 | | Mole Richardson Windmachine Moleffect #1971
- 18" Studio Fan
- Rolling Stand
|
$50.00 | 7 | | Motorola CP200 Two-Way Radio Package
- 6 x Walkie Talkies
- 6 x Antennas
- 8 x Batteries
- 8 x Surveillance
- 8 x Spare Ear Inserts
- 1 x 6 Gang Charger
- 1 x Power Cord
- 1 x Hard Case |
$3.00 | 6 | | Motorola CP200 Remote Speaker
- Walkie Talkie Accessory
- Two-Way Radio Accessory
- Added to kits in place of surveillance at no extra cost |
$1.00 | 1 | | Apple Lightning to HDMI Adapter |
$1.00 | 1 | | Apple USB-C to USB |
$1.00 | 2 | | Apple Thunderbolt to Firewire |
$3.00 | 1 | | Blackmagic Design
- Bi-Directional Micro Converter
- HDMI to SDI
- Monitor / Camera Support
- Includes USB Cord and Power Supply |
$3.00 | 1 | | Blackmagic Design
- Micro Converter
- HDMI to SDI
- Monitor / Camera Support
- Includes Power Supply |
$5.00 | 1 | | AJA Video Hi5 HD-SDI to SDI / HDMI
- Includes Power Cord |
$5.00 | 1 | | AJA Distribution Amplifier
- HD5DA 1x4 HD/SD-SDI
- Monitor / Camera Support
- Includes Power Supply |
$5.00 | 1 | | Rocketfish HDMI Splitter
- 1 Input / 2 Outputs
- 1 x Power Cable |
$3.00 | 1 | | Sewell Echo
- HDMI to HDMI 4k Scaler
- Monitor / Camera Support
- Includes Power Cable |
$5.00 | 2 | | Biground 4k HDMI Switcher
- 4K 60HZ Auto Selector - 3-In / 1-Out
-1 x Remote Control
- 1 x IR Cable
- 1 x DC to USB Cable
- 1 x USB Block
- Support HDMI 2.0 HDCP2.2 CEC 3D UHD HDR 4:4:4 SDR 18Gbps 1080P HD Low Power |
$5.00 | 1 | | 50' HD-SDI BNC Cable
- Monitor / Camera Support |
$4.00 | 1 | | 40' HD-SDI BNC Cable
- Monitor / Camera Support |
$3.00 | 2 | | 25' HD-SDI BNC Cable
- Monitor / Camera Support |
$2.50 | 1 | | 12' HD-SDI BNC Cable
- Monitor / Camera Support |
$2.00 | 1 | | 6' HD-SDI BNC Cable
- Monitor / Camera Support |
$1.00 | 4 | | 12" Ultra Slim HD-SDI BNC to Right Angle BNC Cable
- Monitor / Camera Support |
$3.00 | 2 | | 12' HDMI Cable
- Monitor / Camera Support |
$1.50 | 1 | | 3' HDMI Cable
- Monitor / Camera Support |
$1.00 | 1 | | 2' HDMI Cable
- Monitor / Camera Support |
$1.00 | 1 | | Atomos 4k Coiled HDMI Cable
- 12" Coiled / 24" Extended
- 4K 60p Supported
- HD 240p Supported |
$2.00 | 1 | | Boom Pole Holder (AUDIO) |
$8.00 | 1 | | Rode Micro Boompole (AUDIO)
- 3-Section Telescopic Boompole
- 33" Collapsed
- 6.75' Fully Extended
- Universal Shockmount (SM4) |
$5.00 | 1 | | Desktop Mic Stand with Microphone Clip (AUDIO) |
$10.00 | 2 | | On-Stage Mic Stand with Boom Arm and Microphone Clip (AUDIO) |
$15.00 | 1 | | MXL 3000 Microphone Bundle (AUDIO)
- with Shock Mount
- with 5" Metal Pop Filter
- with Adjustable Gooseneck
- with Mic Stand Bracket
- with Padded Case |
$6.00 | 1 | | Sennheiser e935 Microphone (AUDIO)
- with Padded Case |
$5.00 | 1 | | 5" Dual Pop Filter (AUDIO)
- with Adjustable Gooseneck
- with Microphone Stand Bracket |
$5.00 | 2 | | 3" Dual Pop Filter (AUDIO)
- with Adjustable Gooseneck
- with Microphone Stand Bracket |
$10.00 | 1 | | Pyle Portable Isolation Shield (AUDIO) |
$5.00 | 1 | | 50' XLR to 1/4 Inch (AUDIO)
- Female XLR
- Male 1/4 Inch |
$5.00 | 2 | | 24' XLR Cable (AUDIO) |
$4.00 | 2 | | 20' XLR Cable (AUDIO) |
$3.00 | 2 | | 18' XLR Cable (AUDIO) |
$2.00 | 1 | | 15' XLR Cable (AUDIO) |
$1.50 | 1 | | 10' XLR Cable (AUDIO) |
$1.00 | 2 | | 6' XLR Cable (AUDIO) |
$1.00 | 1 | | 6' XLR Jack to Stereo Mini Plug (AUDIO) |
$1.00 | 1 | | 6' Male XLR Plug to Male RCA / Phone Plug (AUDIO) |
$1.00 | 1 | | 6' Female XLR Plug to Male RCA / Phone Plug (AUDIO) |
$1.00 | 1 | | 6' Male XLR to Female RCA / Phone Jack (AUDIO) |
$1.00 | 1 | | 6' Female XLR to Female RCA / Phone Jack (AUDIO) |
$1.00 | 1 | | 5' Dual RCA to XLR Male Y Splitter Patch Cable (AUDIO) |
$1.00 | 1 | | 6" - 1/4" Mono Male 2 RCA Female Adapter Cable (AUDIO) |
$1.00 | 1 | | 6" - 1/4" Stereo Male Plug to 1/4" Female Splitter (AUDIO) |
$1.00 | 1 | | 6" Female RCA to Male Splitter (AUDIO) |
$1.00 | 2 | | 6" - 3.5mm Male to Female RCA Splitter |
$1.00 | 1 | | 2' - 3.5mm to Male RCA Splitter |
$0.25 | 15 | | Various Audio and Video Adapters
- 3 x Female RCA Barrels
- 2 x Male BNC to Male RCA
- 1 x Female RCA to Male
BNC
- 1 x BNC Barrel
- 3 x Female 3.5mm to Male 1/4"
- 1 x Male 1/4" to Female 3.5mm
- 1 x HDMI to HDMI Coupler
- 2 x HDMI 90º
- 1 x HDMI to Mini HDMI |
$1.00 | 1 | | Anker PowerPort
- 6 x USB Charging Port
- 1 x Power Cable |
$15.00 | 1 | | Sekonic L-758C DigitalMaster
- 1 x Light / Spot Meter
- 2 x Protective Caps
- 1 x Laynard
- 1 x Soft Carrying Pouch |
$15.00 | 1 | | Sekonic C-500 Prodigi Color Meter
- 1 x Color Meter
- 1 x Laynard
- 1 x Soft Carrying Pouch |
$10.00 | 1 | | Southwire 21030T True RMS AC Clamp Meter
- 1 x AC Clamp Meter
- 2 x Test Leads (Red/Black)
- 1 x Temperature Probe
- 1 x Banana PlugAdapter
- 1 x Instruction Manual
- 1 x Soft Carrying Pouch |
$0.50 | 2 | | Digital AC Voltmeter
- DM55-1 |
$1.00 | 2 | | Coiled P-Tap / D-Tap Cable
- 4-Pin XLR Power
- Monitor / Camera Support
- Monitor / Camera Support |
$1.00 | 2 | | Straight P-Tap / D-Tap Cable
- 4-Pin XLR Power
- Monitor / Camera Support
- 10' Cable
- Monitor / Camera Support |
$1.00 | 2 | | Alvins' Cables
- Male P-Tap / D-Tap to 2.1 DC 12v Right Angle Cable
- Monitor / Camera Support |
$1.00 | 1 | | Alvin's Cables
- Male P-Tap / D-Tap to Tap to 4-Port Female D-Tap
- Monitor / Camera Support |
$1.00 | 1 | | HDMI Display Port to Female DVI Adapter Cable |
$100.00 | 1 | | Anton Bauer CINE VCLX Battery with Charger & Cable
- 690Wh Battery
- Dual 14.4v Output
- Single 18v Output
- 1 x 12' 3-Pin XLR Power Cable
- Monitor / Camera Support |
$10.00 | 2 | | IDX System Technology A-AB2E V-Mount Adapter Plate (Gold Mount) (Anton Bauer)
- Monitor / Camera Support |
$100.00 | 1 | | PowerExtra V-Mount Battery Kit
- 4 x Batteries
- 4 x D-Tap Battery
Charger w/ Power Cable
- 1 x Soft Case for Chargers
- 1 x Hard Travel Case
- 2 x P-Tap / D-Tap Out
- 2 x USB Port
- 14.8V, 15Ah, 222Wh
- Monitor / Camera Support
|
$75.00 | 2 | | IDX V-Mount Battery Kit
- 3x Batteries
- One Dual Charger
- 1x Power Cord
- 14.8v, 9.2Ah, 136Wh
- Airline Safe
- 1 x Hard Travel Case
- Monitor / Camera Support |
$50.00 | 2 | | Rolux V-Mount Battery Kit
- 2x Batteries
- One Dual Charger
- 1x Power Cord
- 14.8v, 8.8Ah, 130Wh
- 1 x Hard Travel Case
- P-Tap / D-Tap Out
- Monitor / Camera Support |
$75.00 | 1 | | B4B Gold Mount Battery Kit
- 3 x Batteries
- One Dual Charger
- 1x Power Cord
- 1 x Hard Travel Case
- 14.8v, 10Ah, 150Wh
- P-Tap / D-Tap Out
- Monitor / Camera Support |
$30.00 Kit | 1 | | NP-F550 7.4V Battery Kit
- 12 x Batteries
- 2 x Dual Charger w/ Power Cord
- 2 x Single Charger
- 1 x Soft Case
- Monitor / Camera Support |
$10.00 | 3 | | Lightronics AS40D Portable Dimmer Pack
- 4 x 600w Channels
- USITT DMX-512 Protocol
|
$15.00 | 1 | | Lightronics AS42 Portable Dimmer Pack
- 4 x 1200w Channels
- USITT DMX-512 Protocol
- Three Wire Multiplex Protocol |
$25.00 | 1 | | SPE5 FlickerMaster Flicker Box (LIGHTS) |
$40.00 | 1 | | Magic Gadgets Shadowmaker Flicker Box
(LIGHTS) |
$20.00 | 1 | | ADJ VF1300 Fog Machine
- 1 Liter of Water Based Fluid
- 1 IEC Power Cord
- 1 x Hanging Bracket
- 1 x Wired Remote
- 1 x Wireless Transmitter
- 1 x Wireless Receiver |
$50.00 | 1 | | Rosco Alpha 900 v. 2 Professional Fog Machine
- 1 IEC Power Cord
- 1 Wired Remote
- Locking Hard Case
- 1 Liter of Water Based Fluid |
$75.00 | 1 | | Reel EFX DF-50 Hazer
- Road Case (Upon Request)
- 1 Litre of Water Based Fluid |
$75.00 | 2 | | Look Solutions Unique 2.1 Hazer
- 2 Litre Tank of Water Based Fluid
- 1 x Haze Diverter
- 1 x Plastic Tote |
$3.00 | 2 | | Infared Thermometer
- Carrying Pouch
- 2 x Spare Batteries
- Instruction Manual |
$10.00 | 1 | | Collapsible Rolling Garment Rack (CLOTHES / WARDROBE) |
$5.00 | 4 | | Tall Director's Chair |
$4.00 | 2 | | Medium Director's Chair |
$3.00 | 2 | | Low Director's Chair |
$20.00 | 2 | | Pop-Up Tent |
$35.00 | 3 | | Pop-Up Tent with Sides |
$5.00 | 1 | | Multi-Speed Floor Fan |
$5.00 | 1 | | Blower Fan |
$2.00 | 2 | | 4' Level |
$1.00 | 33 | | Ratchet Straps |
$1.50 | 18 | | Furni Pad | Sound Blanket |
$3.00 | 1 | | 2-Step Single Sided Ladder |
$5.00 | 1 | | 4-Step Double Sided Ladder |
$5.00 | 1 | | 6-Step Single Sided Ladder |
$7.00 | 2 | | 6-Step Double Sided Ladder |
$8.00 | 1 | | 8-Step Single Sided Ladder |
$10.00 | 1 | | 8-Step Double Sided Ladder |
$12.00 | 1 | | 12-Step Double Sided Ladder |
$8.00 | 5 | | 6' Folding Table |
$6.00 | 1 | | 4' Collapsible Bi-Folding Table |
$7.00 | 2 | | 6' Collapsible Bi-Folding Table |
$3.00 | 9 | | Lifetime Folding Chair
- 400lb Rated |
$2.25 | 20 | | White Folding Chair
- 225lb Rated |
$2.00 | 2 | | Folding Lawn Chair |
$1.00 | 2 | | Insulated Cooler Tote
- Holds up to 50 Cans |
$3.00 | 4 | | 45qt. Cooler |
$1.00 | 6 | | 18" Traffic / Safety Cone |
$1.50 | 6 | | 30" Traffic / Safety Cone |
$1.00 each | 20 | | Production Signs (12" x 18")
- 20 x Filming In Progress |
$1.00 each | 24 | | Production Signs (24" x 18")
- 2 x Base Camp w/ Arrow
- 2 x Crew Parking w/ Arrow
- 2 x To Set w/ Arrow
- 2 x Exit
- 2 x Catering w/ Arrow
- 2 x Restrooms w/ Arrow
- 2 x Extras w/ Arrow
- 2 x Extras Parking w/ Arrow
- 8 x Arrows |
$1.00 | 3 | | 12” China Ball (LIGHTS)
- ¼ Silk
- 60w Max |
$2.00 | 1 | | 16” China Ball (LIGHTS)
- ¼ Silk
- 100w Max |
$3.00 | 2 | | 24” China Ball (LIGHTS)
- ¼ Silk
- 150w Max |
$10.00 | Expendable(s) | | C-47 (100 Count) |
$1.50
per cut ft | Expendable(s) | | 3/16" Twisted Manila Rope Coil (600') |
Price Varies | Expendable(s) | | Gels (Call or email for availability) |
Price Varies | Expendable(s) | | Lamps - Globes - Bulbs (Call or email for availability) |
$22.00
per roll | Expendable(s) | | 2" Gaff Tape (Call or email for availability) |
$16.00
per roll | Expendable(s) | | 1" Gaff Tape (Call or email for availability) |
$16.00
per roll | Expendable(s) | | 2" Paper Tape (Call or email for availability) |
$16.00
per roll | Expendable(s) | | 1" Paper Tape (Call or email for availability) |
$9.00
per roll | Expendable(s) | | Snot Tape (Call or email for availability) |
$6.00 | Expendable(s) | | Black Sash Cord / Mason Line / Trick Line (Call or email for availability) |
$5.00 | Expendable(s) | | White Sash Cord / Mason Line / Trick Line (Call or email for availability) |
$25.00
per sheet | Expendable(s) | | 4x8' White Foam Core (Call or email for availability) |
$25.00
per sheet | Expendable(s) | | 4x8' Black Foam Core (Call or email for availability) |
$25.00
per sheet | Expendable(s) | | 4x8' Black and White Foam Core (Call or email for availability) |
$25.00
per sheet | Expendable(s) | | 4x8' Bead Board
- Silver / White
(Call or email for availability) |
$25.00
per sheet | Expendable(s) | | 4x8 Reflective (Silver) Bead Board (Call or email for availability) |
$2.00 each | Expendable(s) | | Male Add-A-Tap
- For 18/2 Zip Cord |
$2.00 | Expendable(s) | | Female Add-A-Tap
- For 18/2 Zip Cord |
DAILY
UNIT RATE | QUANTITY | IMAGE | EQUIPMENT |